Bosch Rexroth | 4WE6E73-6XEG24N9DAA1262
4WE6E73-6X/EG24N9DA/A12/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6E73-6X/EG24N9DA/A12/62 valve is produced by Bosch Rexroth for the WE Directional Spool Valves series and is intended to switch hydraulic flow paths in automated machinery. It operates on a nominal voltage of 24 V DC so standard control boards can power the solenoid directly. The coil draws 1.25 A at a steady 30 W, giving designers clear figures for electrical load calculations. A duty cycle of 100 % ED allows continuous energizing, while insulation class F combines with a permitted coil surface temperature of 120 °C to safeguard the winding during prolonged service. The assembly can change state up to 4.2 times per second, supporting rapid response control loops, and its manifold interface follows the ISO 4401-03-02-0-05 porting pattern for straightforward mounting on common subplates.
Pressure capacity reaches 350 bar on ports A, B, and P, enabling the valve to handle high-pressure supply lines, and a maximum flow of 80 l/min ensures adequate volume for mid-range cylinders and motors. The tank port withstands 210 bar, and the manual override parts are rated for 50 bar in that same line, allowing safe hand actuation during setup or troubleshooting. NBR seals contain mineral oil under these pressures and support reliable leakage control. A clamping length of 42 mm positions the body firmly within a sandwich stack, while the locating hole and pin defined by ISO 8752-3x8-St (/62) keep the housing aligned on the subplate. The two-solenoid configuration weighs 1.95 kg, making installation or replacement manageable without lifting equipment.
Technical Specifications
Clamping Length
42 mm
Duty Cycle
100% ED
Insulation Class (dc)
F
Locating Hole And Pin
ISO 8752-3x8-St (/62)
Manual Override Max Tank Pressure
50 bar
Max Coil Surface Temperature
120°C
Max Flow (dc)
80 l/min
Max Operating Pressure (a/b/p)
350 bar
Max Switching Frequency (dc)
4.2 1/s
Nominal Coil Current
1.25 A
Nominal Power
30 W
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Seals
NBR
Tank Port Max Pressure (dc)
210 bar
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
