4WE6E6X/EW110N9DK25L/V AN

The 4WE6E6X/EW110N9DK25L/V AN directional spool valve belongs to the WE Directional Spool Valves series and is manufactured by Bosch Rexroth. It diverts hydraulic flow in automated systems where rapid and repeatable actuation is required. The valve is built in nominal size 6 so it fits common subplates for compact circuits. Its porting pattern follows ANSI B93.9, allowing direct interchange with standard industrial manifolds. Continuous service is supported because the coil can remain energized at a 100% duty cycle. When energized, the solenoid draws a switch-on power of 220 VA to shift the spool and then settles to a holding power of 50 VA to maintain position. Operation is supplied from a 110 V AC source at 50 or 60 Hz, matching typical machine power networks. The hydraulic stage tolerates a maximum operating pressure of 350 bar and passes up to 60 l/min, which covers medium-flow circuits in presses and machine tools.

During electrical service at 50 Hz the coil carries 0.52 A, while operation at 60 Hz lowers the current requirement to 0.39 A. The solenoid terminals are arranged in a DK25L five-pole connector that supports quick exchange without rewiring. An IP65 rating protects the enclosure against dust and water jets so the valve can be mounted on exposed machinery. A concealed N9 manual override lets technicians shift the spool during commissioning without removing the connector. Surge suppression in the coil limits switch-off overvoltage to 500 V, preventing insulation damage and extending coil life. Dynamic seals are molded from FKM to resist mineral oils and elevated temperatures encountered in industrial hydraulics. These electrical and mechanical features complement the hydraulic ratings stated earlier and enable reliable directional control in automated production equipment. The combination of a standardized connector, defined current levels, and a robust enclosure simplifies integration into control cabinets and field wiring.