Bosch Rexroth | 4WE6E6XEW110N9DK25L62-CSA
4WE6E6X/EW110N9DK25L/62 CSA
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6E6X/EW110N9DK25L/62 CSA valve is produced by Bosch Rexroth as part of the WE Directional Spool Valves series. Designed to route hydraulic flow between actuators and pump lines, it features a nominal size of 6 so the internal passages match common D03 circuit dimensions. A four-port body enables pressure, tank, and dual work lines to be connected without external manifolds. The internal spool carries the E symbol profile to shift flow paths precisely when the coil is energized. Actuation is supplied by a wet-pin, detachable coil solenoid that simplifies replacement without disturbing hydraulic plumbing. The coil operates at a nominal voltage of 110 V, and the voltage type is AC 50/60 Hz, letting the valve tie directly into standard control transformers. During pull-in the assembly draws a rated current of 0.39 A at 110 V 60 Hz, which limits panel fuse size. All pressure bearing parts are rated for 350 bar, allowing the unit to work in high-pressure industrial circuits.
Maximum flow capacity is 60 l/min, so the valve can handle moderate actuator speeds without excessive pressure loss. The body mounts on a NFPA T3.5.1 D03 interface, enabling direct stacking onto standardized sub-plates. Port locations follow the ISO 4401-03-02-0-05 pattern to maintain interchangeability with other size-03 valve types. Electrical power reaches the coil through a DK25L five-pole plug, and the connector conforms to ANSI B93.55M-1981 to keep wiring layouts consistent across equipment. A concealed N9 manual override is provided for commissioning or emergency strokes when power is absent. The armature assembly is secured by an ISO 8752-3x8-St /62 spring pin, preventing unintended displacement during vibration. Finally, an IP65 protection class shields the enclosure from dust and water jets, which supports reliable operation in typical factory environments.
Technical Specifications
Connector Standard
ANSI B93.55M-1981
Electrical Connection
DK25L (5-Pole)
Locking Pin
ISO 8752-3x8-St (/62)
Manual Override
Concealed (N9)
Max Flow (ac)
60 l/min
Max Operating Pressure
350 bar
Mounting Interface
NFPA T3.5.1 D03
Nominal Size
6
Nominal Voltage
110 V
Number Of Ports
4
Porting Pattern
ISO 4401-03-02-0-05
Protection Class (ip)
IP65
Rated Current
0.39 A (110 V 60 Hz)
Solenoid Type
Wet-Pin, Detachable Coil
Spool Symbol
E
Voltage Type
AC 50/60 Hz
1620 Old Apex Road
Shipping & Payment Options
