Bosch Rexroth | 4WE6E6XEW110N9DJL
4WE6E6X/EW110N9DJL
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6E6X/EW110N9DJL directional spool valve is manufactured by Bosch Rexroth within the WE Directional Spool Valves series and is intended to route pressurized fluid in automated hydraulic systems. The electrical coil accepts a nominal voltage of 110 V AC at either 50 Hz or 60 Hz, giving the installer flexibility with global power standards. During energization the solenoid draws 220 VA to shift the spool, after which demand falls to a 50 VA holding level that keeps temperature rise low. A continuous 100 % S1 duty cycle allows the valve to remain energized indefinitely without thermal rest periods. Rated currents of 0.34 A at 50 Hz and 0.39 A at 60 Hz assist in selecting fuses and contactors, while a voltage tolerance of ±10 % keeps operation reliable under typical plant fluctuations. The assembly can switch up to two times per second, so sequencing controllers must observe this 2 Hz limit to avoid coil over-heating.
The hydraulic end of the valve withstands 350 bar on ports A, B, and P, enabling connection to high-pressure pumps and actuators, whereas port T must be restricted to 160 bar to protect the tank return path. A maximum flow capacity of 60 l/min defines the largest circuit volume the metering section can pass without excessive pressure loss. Mineral oils that comply with DIN 51524 are the specified operating fluids; compatibility with this medium is supported by NBR seals that resist swelling and leakage. The unit may be installed in any orientation, which simplifies manifold design in confined spaces. Total mass with two solenoids is 1.95 kg, allowing easy handling during maintenance or retrofit work. These hydraulic, mechanical, and material limits frame the service envelope for motion, clamping, or positioning tasks in industrial machinery.
Technical Specifications
Duty Cycle
100% (S1)
Holding Power
50 VA
Hydraulic Fluid
Mineral Oils (DIN 51524)
Installation Position
Any
Max Operating Pressure (a, B, P)
350 bar
Max Pressure Port T (ac)
160 bar
Max Switching Frequency (ac)
2 1/s
Maximum Flow (ac)
60 l/min
Nominal Frequency
50/60 Hz
Nominal Voltage
110 V AC
Rated Current (50 Hz)
0.34 A
Rated Current (60 Hz)
0.39 A
Seal Material
NBR
Switch-on Power
220 VA
Voltage Tolerance
±10%
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
