Bosch Rexroth | 4WE6E6XEW110N9DAL62-AN
4WE6E6X/EW110N9DAL/62 AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6E6X/EW110N9DAL/62 AN directional spool valve is produced by Bosch Rexroth for the WE Directional Spool Valves series. Designed to switch hydraulic flow paths under electrical command, it operates on a 110 V AC supply at either 50 or 60 Hz. The solenoid draws 0.52 A at 50 Hz and 0.39 A at 60 Hz, so protective devices can be sized for the actual mains frequency. Switch-on power reaches 220 VA during actuation, then falls to a holding level of 50 VA to minimize steady-state heating. A 100 percent duty cycle permits continuous energization, provided the coil surface temperature does not exceed 120 °C. Environmental sealing is rated IP65, keeping out dust and water jets encountered in factory wash-down. Wiring enters through a 1/2-14 NPT cable gland that secures standard conduit and relieves strain on the internal terminals.
The valve tolerates 350 bar on pressure ports A, B, and P and withstands 160 bar on the tank line, enabling use in medium-pressure hydraulic machinery. A flow rating of 60 L/min (15.8 US gpm) maintains acceptable pressure drop for cylinders and motors of moderate size. Mounting follows the ANSI B93.9 porting pattern, which aligns with common CETOP 3 subplates. System oil must stay cleaner than ISO 4406 class 20/18/15 to avoid spool binding. Accurate location in the manifold is provided by a hole fitted with an ISO 8752 3 × 8 mm spring pin, and a concealed manual override lets technicians shift the spool mechanically during commissioning or power loss. These characteristics support dependable hydraulic automation with electrical actuation, manual backup, precise alignment, and controlled contamination.
Technical Specifications
Cleanliness Class (iso 4406)
20/18/15
Coil Rated Current (50 Hz)
0.52 A
Coil Rated Current (60 Hz)
0.39 A
Duty Cycle (ed)
100%
Electrical Connection
1/2"-14 NPT Cable Gland
Holding Power
50 VA
Ingress Protection
IP65
Locating Hole
With Locking Pin (ISO 8752-3x8)
Manual Override
Concealed
Max Coil Surface Temp
120 °C
Max Flow (ac)
60 l/min (15.8 US gpm)
Max Operating Pressure (a/b/p)
350 bar (5076 psi)
Max Tank Port Pressure (ac)
160 bar (2320 psi)
Porting Pattern
ANSI B93.9
Supply Voltage
110 V AC (50/60 Hz)
Switch-on Power
220 VA
1620 Old Apex Road
Shipping & Payment Options
