Bosch Rexroth | 4WE6E6XEW100N9DL
4WE6E6X/EW100N9DL
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6E6X/EW100N9DL valve is part of the WE Directional Spool Valves series from Bosch Rexroth and is used to route pressurized fluid in hydraulic automation systems. Its NFPA T3.5.1 D03 mounting interface allows direct assembly on standard subplates, and the ISO 4401-03-02-0-05 porting pattern matches common manifolds for quick replacement. The solenoid is designed for a nominal supply of 100 V AC at 50 or 60 Hz, drawing 0.56 A on 50 Hz grids and 0.44 A on 60 Hz networks so wiring can be sized appropriately. A switch-on demand of 220 VA produces rapid actuation, while the 50 VA holding power limits continuous energy use once the spool reaches its end position. Continuous operation is possible because the duty cycle is 100 % ED, and the IP65 enclosure rating keeps dust and low-pressure water from entering the coil housing.
The permissible coil surface temperature reaches 120 °C, keeping the winding insulation within its thermal class during extended energization. Ports A, B, and P tolerate up to 350 bar, allowing the valve to control actuators in high-pressure circuits, whereas port T withstands 160 bar so moderate back-pressure can be returned to tank. A flow capacity of 60 l/min supports medium-speed cylinders and motors without excessive pressure loss, provided the hydraulic fluid is maintained at ISO 4406 cleanliness class 20/18/15 to prevent spool seizure. The assembly with two solenoids weighs 1.95 kg, making it light enough for single-person installation in compact power units.
Technical Specifications
Coil Surface Temperature
120 °C (Standard)
Duty Cycle
100% (ED)
Fluid Cleanliness
ISO 4406 Class 20/18/15
Holding Power
50 VA
Max Operating Pressure
350 bar (Ports A, B, P)
Max Tank Port Pressure (ac)
160 bar (Port T)
Maximum Flow (ac)
60 l/min
Mounting Interface
NFPA T3.5.1 D03
Nominal Voltage
100 V AC (50/60 Hz)
Porting Pattern
ISO 4401-03-02-0-05
Protection Class
IP65
Rated Current 50 Hz
0.56 A
Rated Current 60 Hz
0.44 A
Switch-on Power
220 VA
Weight
1.95 kg (Two Solenoids)
1620 Old Apex Road
Shipping & Payment Options
