1-888-551-3082 | 1-919-443-0207 | sales@hydraulicpartsusa.com
You will get an email confirming we have received your inquiry.
A team member will review your request and be in touch concerning any questions or specifications.
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6E6X/EG26N2K4K directional spool valve belongs to the WE Directional Spool Valves series and is manufactured by Bosch Rexroth. It shifts hydraulic flow paths in automated circuits and is energized by two solenoids. The valve is built to the ISO 4401-03-02-0-05 porting pattern, allowing direct mounting on standard subplates. It tolerates a maximum operating pressure of 350 bar on ports A, B, and P, and passes up to 80 l/min direct-current flow without exceeding rated pressure drop. The solenoid coils run on 26 V DC, drawing a rated current of 1.17 A when fully energized. Electrical connection is made through a DIN EN 175301-803 (K4K) plug, and the coil circuit is protected against inductive kick by a permitted switch-off overvoltage of 500 V.
The valve body presents a clamping length of 42 mm for secure tie-bolt installation and has a mass of 1.95 kg with both solenoids fitted. It can be mounted in any position, and its IP65 enclosure rating guards the solenoids and wiring against dust and water jets. A small mushroom button provides a manual override for setup tasks, and this override may be used while the tank line is below 50 bar. Continuous service allows a tank port pressure up to 210 bar, provided the mounting screws are tightened to 7 Nm. These mechanical limits maintain reliable operation in mobile or stationary hydraulic systems.
Clamping Length
42 mm
Electrical Connection
DIN EN 175301-803 (K4K)
Ingress Protection
IP65
Installation Position
Any
Manual Override
Mushroom Button (Small)
Manual Override Max Tank Pressure
50 bar
Max Flow (dc)
80 l/min
Max Operating Pressure (a/b/p)
350 bar
Max Switch-off Overvoltage
500 V
Max Tank Port Pressure (dc)
210 bar
Mounting Screw Torque
7 Nm
Nominal Voltage
26 V DC
Porting Pattern
ISO 4401-03-02-0-05
Rated Current
1.17 A
Weight (two Solenoids)
1.95 kg
Worldwide Shipping with FedEx and UPS.
We accept all major credit cards
1 year Hydraulic Parts USA warranty on ALL products
We are a Better Business Bureau A+ business