Bosch Rexroth | 4WE6E6XEG24NK4V62
4WE6E6X/EG24NK4/V/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6E6X/EG24NK4/V/62 directional spool valve is manufactured by Bosch Rexroth within the WE Directional Spool Valves series and serves to route hydraulic flow in automated machinery. Its nominal size of 6 suits medium-capacity circuits, while the NFPA D03 mounting interface allows direct installation on common manifold blocks. The solenoid coil is rated for 24 V DC to match standard control supplies, and a current draw of 1.25 A energizes it without stressing typical power modules. Electrical power consumption is 30 W, and a 100 percent duty cycle permits the coil to remain energized continuously. Electrical connection is made through a K4 plug conforming to DIN EN 175301-803 for quick servicing, and an IP65 enclosure rating prevents dust intrusion and low-pressure water entry.
The internal spool designated by symbol E establishes the flow paths required for bidirectional actuator control. Ports P, A, and B can withstand operating pressures up to 350 bar, while the tank port T is limited to 210 bar in direct-current use, so return line design must respect this limit. The valve can pass 80 l/min of hydraulic fluid, supporting the demands of mid-range cylinders and motors. An ISO 4401-03-02-0-05 porting pattern aligns its passages with standardized subplates for straightforward replacement. FKM seals resist high temperature and fluid additives, maintaining leakage control over long service intervals. The unit is supplied without a manual override, eliminating the possibility of uncommanded shifting, and a locating hole with a locking pin (suffix /62) holds the body securely on the mounting face during vibration.
Technical Specifications
Coil Voltage
24 V DC
Duty Cycle
100% ED (S1)
Electrical Connector
K4 (DIN EN 175301-803)
Ip Rating
IP65
Locating Hole
With Locking Pin (/62)
Manual Override
N
Max Flow (dc)
80 l/min
Max Operating Pressure (p,a,b)
350 bar
Max Tank Port Pressure (t)
210 bar (DC)
Mounting Interface
NFPA D03
Nominal Power
30 W
Nominal Size
6
Porting Pattern
ISO 4401-03-02-0-05
Rated Current
1.25 A
Seal Material
FKM
Spool Symbol
E
1620 Old Apex Road
Shipping & Payment Options
