Bosch Rexroth | 4WE6E6XEG24N9K72L62SO407
4WE6E6X/EG24N9K72L/62SO407
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6E6X/EG24N9K72L/62SO407 is produced by Bosch Rexroth within the WE Directional Spool Valves series and switches hydraulic flow between actuator paths in automated machinery. It is built in size 6, which keeps the mounting footprint compact for manifolds that handle medium power circuits. The spool code E defines the flow pattern required for typical cylinder control. A maximum direct-current flow rate of 60 l/min supports moderate cycle times without excessive pressure loss, while the pressure limit of 315 bar on ports P, A, and B allows safe operation in high-pressure systems. The ISO 4401-03-02-0-05 porting pattern and the NFPA T3.5.1 D03 interface make the valve interchangeable across European and North American subplates. A concealed manual override lets maintenance staff shift the spool during commissioning or power loss, and a total mass of 1.95 kg simplifies handling during installation.
The solenoid section is designed for a nominal supply of 24 V DC and draws a rated current of 1.25 A, providing the magnetic force needed to move the spool under full pressure load. Coil surface temperature is limited to 85 °C so the surrounding oil and wiring are not overheated during continuous duty. An M12×1 four-pole connector with coding A offers quick electrical hookup and supports signal lines for status feedback. The housing carries an IP65 rating, allowing the valve to operate in areas exposed to dust and low-pressure water jets. Electrical safety is classified as protection class III, meaning the coil is powered by a separated extra-low voltage circuit. A locating hole and ISO 8752-3×8 pin keep the body precisely aligned on the manifold, and the tank port is rated for 210 bar to withstand transient return surges.
Technical Specifications
Coil Max Surface Temp (so407)
85 C
Electrical Connector
M12x1, 4-pole (coding A)
Ip Rating
IP65
Locating Hole And Pin
ISO 8752-3x8
Manual Override
Concealed Type
Max Flow (dc, So407)
60 l/min
Max Pressure (p/a/b)
315 bar
Max Pressure (t)
210 bar
Nfpa Interface
T3.5.1 D03
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Protection Class (vde 0580)
III
Rated Current
1.25 A
Size
6
Spool Code
E
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
