Bosch Rexroth | 4WE6E6XEG24N9DK35LSO407
4WE6E6X/EG24N9DK35LSO407
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6E6X/EG24N9DK35LSO407 valve is built by Bosch Rexroth for the WE Directional Spool Valves series. It directs hydraulic flow to actuators in automated machinery. The valve handles a maximum operating pressure of 315 bar on ports p, a, and b. Tank port t is allowed up to 210 bar. It accommodates a peak flow of 60 l/min in direct-current actuation. The mounting interface follows the ISO 4401-03-02-0-05 porting pattern for interchangeability in manifold plates. Bosch Rexroth supplies the unit with a high-power wet-pin solenoid and a detachable coil to simplify service. Electrical power is supplied at 24 V DC, matching the nominal voltage rating. Under this supply the coil draws 1.25 A during steady operation. The valve can be installed in any position, which helps fit crowded hydraulic blocks.
The coil surface temperature reaches up to 85 °C under maximum load. The winding system corresponds to insulation Class F for thermal endurance. For wiring, an M12×1 four-pin connector with an integrated LED and suppressor is provided. The housing achieves IP65 protection so the assembly resists dust ingress and water jets. A concealed manual override allows service personnel to shift the spool when needed. This override may be used as long as tank pressure remains below 50 bar. During de-energization the circuit limits switch-off overvoltage to 500 V to protect control electronics; this transient suppression contributes to longer coil life. Operation is recommended with hydraulic fluid cleanliness better than ISO 4406 code 20/18/15 to preserve internal surfaces.
Technical Specifications
Cleanliness Class (iso 4406)
20/18/15
Coil Max Surface Temperature
85 C
Electrical Connection
M12x1 4-Pin, LED + Suppressor
Installation Position
Any
Insulation Class (dc)
Class F
Manual Override
Concealed
Manual Override Max Tank Pressure
50 bar
Max Switch-off Overvoltage
500 V
Maximum Flow (dc)
60 l/min
Maximum Operating Pressure (p,a,b)
315 bar
Maximum Tank Port Pressure (t)
210 bar
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Protection Class
IP65
Rated Current (24 V Dc)
1.25 A
Solenoid Type
High-Power Wet-Pin, Detachable Coil
1620 Old Apex Road
Shipping & Payment Options
