Bosch Rexroth | 4WE6E6XEG24N9DK35L-AN
4WE6E6X/EG24N9DK35L AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6E6X/EG24N9DK35L AN directional spool valve belongs to the WE Directional Spool Valves series and is manufactured by Bosch Rexroth. It shifts hydraulic flow paths to automate cylinder and motor actuation in industrial machinery. The solenoid coils operate on a nominal voltage of 24 V DC, and at this level they draw a rated current of 1.25 A, setting the electrical load for the control module. Power consumption is 30 W, a figure that limits heat rise when the valve remains energized. Because the duty cycle is specified at 100 % (S1), the unit can stay powered indefinitely without thermal interruption. The circuit tolerates a ±10 % supply deviation, preventing unexpected drop-outs during minor voltage swings. Wiring is accomplished through an M12 × 1 four-pin connector, so the valve can be replaced quickly in the field. Internal suppression restricts switch-off overvoltage to 500 V, which shields the driver electronics from inductive spikes. The mounting interface follows the ANSI B93.9 porting pattern to fit common subplates.
For hydraulic performance, the valve carries a maximum flow of 80 l/min in direct-current operation, allowing it to serve medium-size circuits. Ports A, B, and P handle operating pressures to 350 bar, while port T is permitted up to 210 bar, defining the safe return-line back pressure. An IP65 ingress-protection rating keeps dust and water jets from reaching the coil assembly in tough plant environments. System oil must achieve a cleanliness class of 20/18/15 according to ISO 4406 to prevent spool scoring. A concealed manual override enables technicians to shift the valve manually during commissioning or power loss. Electrical insulation meets protection class III under VDE 0580, confirming safe operation at the stated voltage. With both solenoids installed the unit weighs 1.95 kg, so a single technician can mount it without lifting aids.
Technical Specifications
Cleanliness Class
20/18/15 (ISO 4406 (c))
Duty Cycle
100% (S1)
Electrical Connection
M12x1 4-Pin
Ingress Protection
IP65
Manual Override Type
Concealed
Max Flow (dc)
80 l/min
Max Operating Pressure A/b/p
350 bar
Max Port T Pressure (dc)
210 bar
Nominal Power
30 W
Nominal Voltage
24 V DC
Porting Pattern
ANSI B93.9
Protection Class (vde 0580)
III
Rated Current
1.25 A (24 V DC)
Switch-off Overvoltage Max
500 V
Voltage Tolerance
±10%
Weight With Two Solenoids
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
