Bosch Rexroth | 4WE6E6XEG24N9DK24L62-AN
4WE6E6X/EG24N9DK24L/62 AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6E6X/EG24N9DK24L/62 AN directional spool valve is produced by Bosch Rexroth within the WE Directional Spool Valves series. It directs hydraulic flow in automated systems and fits circuits that accept nominal size 6 bodies. The valve provides four main ports to route pressure, tank, and actuator lines for bidirectional motion control. Its porting pattern follows ANSI B93.9 so it mounts directly on corresponding subplates without adapters. Actuation is handled by a wet-pin solenoid with a detachable coil to simplify replacement in the field. An M12×1 four-pole connector supplies the 24 V DC rated voltage needed for energizing the coil, while the current draw is limited to 1.25 A to match common PLC outputs. The control section is built to electrical protection class III, keeping the control circuit separated from higher voltages during operation.
A spring return mechanism re-centers the spool after power removal, supporting fail-safe positioning of connected actuators. When manual intervention is required, a concealed override marked N9 allows the operator to shift the spool without energizing the solenoid. The valve withstands operating pressures up to 350 bar in the pressure, A, and B ports and accepts 210 bar on the tank port, enabling use in high-pressure circuits. It passes up to 80 l/min of hydraulic oil, which matches medium-flow industrial machinery. The housing carries an IP65 enclosure rating so dust and low-pressure water jets do not enter the electrical cavity. Positioning is maintained with a locating hole drilled to ISO 8752-3×8-St, aligning the body precisely on the subplate. With two solenoids installed, the assembly weighs 1.95 kg, allowing easy handling during maintenance.
Technical Specifications
Electrical Connection
M12x1 4-pole (DK24L)
Electrical Protection Class
III
Enclosure Rating
IP65
Locating Hole
ISO 8752-3×8-St (/62)
Main Ports
4
Manual Override
Concealed (N9)
Max Operating Pressure (p,a,b)
350 bar
Max Tank Pressure (t, Dc)
210 bar
Maximum Flow (dc)
80 l/min
Nominal Size
6
Porting Pattern
ANSI B93.9 (AN)
Rated Current (24 V Dc)
1.25 A
Rated Voltage
24 V DC
Return Mechanism
Spring Return
Solenoid Type
Wet-Pin, Detachable Coil
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
