Bosch Rexroth | 4WE6E6XEG24N9DK24L2-AN
4WE6E6X/EG24N9DK24L2 AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6E6X/EG24N9DK24L2 AN valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and routes hydraulic flow to cylinders or motors in automated machinery. It is produced in nominal size 6, establishing the mounting and flow passage dimensions for subplate installation. A maximum flow rate of 80 l/min accommodates medium-capacity circuits without excessive pressure drop. Pressure at ports p, a, and b can reach 350 bar, permitting use in high-pressure systems, while the T-port is limited to 210 bar to safeguard return lines. The mounting face follows the ANSI B93.9 porting pattern so the unit fits standard manifolds. Continuous energization is possible because the solenoid carries a 100 percent duty cycle rating. Rapid directional changes are enabled by a switching frequency of up to 4.2 cycles per second. The coil consumes 30 W, providing reliable actuation with controlled heat generation.
Electrical characteristics support reliable solenoid actuation in automated hydraulic circuits. The coil is designed for a nominal voltage of 24 V DC, matching common control supplies. It draws a rated current of 1.25 A, which guides fuse and driver sizing. A voltage tolerance of ±10 percent allows stable operation during moderate supply fluctuations. Connection is made through a 4-pole M12 × 1 plug, simplifying installation and service. An IP65 enclosure rating blocks dust and low-pressure water jets encountered in industrial environments. Windings meet insulation class F so dielectric strength is maintained at elevated temperatures, and the coil surface may safely reach 120 °C in continuous service. The assembly falls under protection class III per VDE 0580, indicating operation at extra-low voltage for increased user safety.
Technical Specifications
Duty Cycle
100% ED
Electrical Connector
M12 x 1, 4-pole
Ingress Protection
IP65
Insulation Class (dc)
F
Max Coil Surface Temperature
120 °C
Max Flow (dc)
80 l/min
Max Operating Pressure (p,a,b)
350 bar
Max Switching Frequency (dc)
4.2 1/s
Max T-port Pressure (dc)
210 bar
Nominal Power (dc)
30 W
Nominal Size
6
Nominal Voltage
24 V DC
Porting Pattern
ANSI B93.9
Protection Class (vde 0580)
III
Rated Current (24 V Dc)
1.25 A
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
