Bosch Rexroth | 4WE6E6XEG24N9C4V
4WE6E6X/EG24N9C4/V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6E6X/EG24N9C4/V directional spool valve belongs to the WE Directional Spool Valves series and is produced by Bosch Rexroth for hydraulic automation tasks where electric control shifts fluid paths. It uses the ISO 4401-03-02-0-05 porting pattern so it can mount on standard subplates found in compact hydraulic manifolds. The solenoid is designed for a nominal voltage of 24 V DC, allowing direct connection to typical machine control supplies, and it draws a nominal current of 1.25 A, which defines the needed power source capacity. A voltage tolerance of ±10 % keeps the spool responsive even when the bus voltage drifts. Electrical input is limited to 30 W, a value that guides cabinet cooling requirements, and a 100 % duty cycle permits continuous energization without overheating. Wiring is completed through an AMP Junior Timer C4 plug, enabling quick field replacement, while class F insulation sustains higher winding temperatures during prolonged service.
The valve withstands operating pressures up to 350 bar so it can operate in high-pressure systems, and it accommodates flows of 80 l/min, supporting medium-size cylinders or motors. A maximum switching frequency of 4.2 cycles per second sets the upper limit for rapid directional changes in servo-type duties. The tank port tolerates 210 bar, allowing circuits that maintain back-pressure on return lines. A concealed N9 manual override lets technicians reposition the spool during power loss without disturbing external settings. Fluid cleanliness must meet ISO 4406 20/18/15 to minimize wear and prevent sticking. FKM seals resist heat and synthetic hydraulic oils, preserving leak-tight performance over long service intervals. With both solenoids installed the assembly weighs 1.95 kg, keeping manifold loads low and easing installation in space-restricted power units.
Technical Specifications
Duty Cycle
100% ED
Electrical Connection
AMP Junior Timer (C4)
Hydraulic Fluid Cleanliness
ISO 4406 20/18/15
Insulation Class (dc)
F
Manual Override
N9 Concealed
Maximum Flow (dc)
80 l/min
Maximum Operating Pressure
350 bar
Maximum Switching Frequency (dc)
4.2 1/s
Maximum Tank Port Pressure (t, Dc)
210 bar
Nominal Current (24 V)
1.25 A
Nominal Power (dc)
30 W
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Seal Material
FKM
Voltage Tolerance
±10%
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
