Bosch Rexroth | 4WE6D6XOFEW110N9K4V62-CSA
4WE6D6X/OFEW110N9K4/V/62 CSA
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6D6X/OFEW110N9K4/V/62 CSA valve is produced by Bosch Rexroth as part of the WE Directional Spool Valves series and is used to direct hydraulic flow in automated machinery. Its size 6 format fits manifolds built to the ISO 4401-03-02-0-05 interface, so installation aligns with common sub-plate layouts. A rated voltage of 110 V at 50/60 Hz lets the solenoid coil run from standard plant power, while a 100 percent duty cycle supports continuous energization without thermal derating. The coil draws 220 VA at switch-on to create the initial magnetic force that shifts the spool, then the circuit can operate up to a system pressure of 350 bar. The design handles 60 l/min of flow on AC service, giving suitable capacity for medium-sized actuators.
A K4 electrical connector following DIN EN 175301-803 speeds field wiring and replacement of the energized coil, and IP65 ingress protection keeps dust and water jets from entering the assembly during wash-down. A concealed N9 manual override lets maintenance staff reposition the spool when power is off, and the two detent positions hold that state mechanically until the solenoid is re-energized. The tank port tolerates 160 bar on AC duty, preventing back-pressure damage in return lines. FKM sealing elements resist high-temperature hydraulic oils, and an ISO 8752-3x8-St locating hole aligns the body precisely on the sub-plate. Once the spool is shifted, only 50 VA is needed to hold it, reducing heat and energy use, and the overall weight of 1.95 kg makes the unit easy to handle during assembly or replacement.
Technical Specifications
Duty Cycle
100% ED
Electrical Connection
K4 (DIN EN 175301-803)
Holding Power
50 VA
Ingress Protection
IP65
Locating Hole
ISO 8752-3x8-St
Manual Override
N9 (Concealed)
Maximum Flow
60 l/min (AC)
Maximum Operating Pressure
350 bar
Maximum Tank Port Pressure
160 bar (AC)
Mounting Interface
ISO 4401-03-02-0-05
Rated Voltage
110 V 50/60 Hz
Seal Material
FKM
Size
6
Spool Positions
2 (detent)
Switch-on Power
220 VA
Weight
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
