Bosch Rexroth | 4WE6D6XOFEW110N9DK25LB10V-AN
4WE6D6X/OFEW110N9DK25L/B10V AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6D6X/OFEW110N9DK25L/B10V AN valve belongs to the WE Directional Spool Valves series produced by Bosch Rexroth for hydraulic automation circuits that require electrically actuated flow reversal. It offers 2 spool positions so a power unit can alternate between two flow paths without mechanical linkages. The solenoid coil is rated for 110 V AC at 50 or 60 Hz, and a ±10 % voltage tolerance keeps shifting performance consistent when supply levels fluctuate. Switch-on power peaks at 220 VA, then the coil settles to 50 VA holding power to reduce continuous heat generation. A DK25L five-pole connector simplifies wiring and maintenance, while a continuous 100 % duty cycle allows the valve to remain energized indefinitely during long production runs. The enclosure carries an IP65 rating, protecting internal parts from dust ingress and low-pressure water spray encountered near hydraulic power units.
The hydraulic end of the same valve manages a maximum flow of 60 l/min and sustains operating pressure up to 350 bar on ports A, B, and P, while port T to tank is limited to 160 bar to safeguard return lines. A 1.0 mm throttle orifice in the pressure port moderates inrush flow and prevents pressure spikes when the spool moves. The design can switch twice per second, supporting rapid cycle machinery that demands frequent directional changes. Port interfaces follow the ANSI B93.9 pattern, ensuring compatibility with standard subplates and manifold blocks. FKM seal material resists mineral oils and many synthetic fluids, maintaining leak-tight operation under thermal cycling. With both solenoids fitted, the assembly weighs 1.95 kg, permitting manual installation without lifting aids.
Technical Specifications
Duty Cycle
100% ED
Electrical Connector
DK25L 5-Pole
Holding Power (ac)
50 VA
Max Flow (ac)
60 l/min
Max Operating Pressure (a/b/p)
350 bar
Max Switching Frequency (ac)
2 1/s
Max Tank Port Pressure (t)
160 bar
Nominal Voltage
110 V AC (50/60 Hz)
Porting Pattern
ANSI B93.9
Protection Class (en 60529)
IP65
Seal Material
FKM
Spool Positions
2
Switch-on Power (ac)
220 VA
Throttle Orifice (p)
1.0 mm
Voltage Tolerance
±10%
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
