Bosch Rexroth | 4WE6D6XOFEW110N9DALB10V62-CSA
4WE6D6X/OFEW110N9DAL/B10V/62 CSA
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6D6X/OFEW110N9DAL/B10V/62 CSA directional spool valve is produced by Bosch Rexroth as part of the WE Directional Spool Valves series. It directs hydraulic flow to actuators when the solenoid receives a 110 V AC signal at either 50 or 60 Hz, letting it integrate with standard plant supplies. At 50 Hz the coil draws 0.52 A, and at 60 Hz the current falls to 0.39 A, which eases transformer sizing. The solenoid needs 220 VA when energized and settles at 50 VA holding power to limit steady-state heating. Continuous energization is possible because the duty cycle is 100 percent. Wiring is completed through a DAL connector with a 1/2-14 NPT light thread, and a concealed N9 manual override allows manual spool shifting for service. An IP65 enclosure rating protects the coil against dust ingress and low-pressure water jets.
The valve handles up to 60 liters per minute, delivering adequate flow for medium-capacity presses and tooling. Pressure at ports A, B, and P may reach 350 bar, whereas the tank port is limited to 160 bar, so return plumbing must stay within that limit to avoid seal overload. It can switch positions twice per second, providing precise directional control in rapid-cycle circuits. Mounting corresponds to the ISO 4401-03-02-0-05 pattern, enabling direct installation on standard subplates without adapters. A throttle insert with a 1.0 mm orifice is installed in port P to restrict inrush flow and damp pressure spikes. FKM seals withstand high temperatures and aggressive hydraulic fluids, helping the assembly maintain leak-free performance under continuous load.
Technical Specifications
Coil Voltage
110 V AC (50/60 Hz)
Connector Type
DAL (1/2"-14 NPT, light)
Duty Cycle
100% ED
Holding Power
50 VA
Manual Override
Concealed (N9)
Max Flow (ac)
60 l/min
Max Operating Pressure (a,b,p)
350 bar
Max Switching Frequency (ac)
2 1/s
Max Tank Port Pressure (t, Ac)
160 bar
Porting Pattern
ISO 4401-03-02-0-05
Protection Class
IP65
Rated Current (50 Hz)
0.52 A
Rated Current (60 Hz)
0.39 A
Seal Material
FKM
Switch-on Power
220 VA
Throttle Insert
Port P Ø 1.0 mm (B10)
1620 Old Apex Road
Shipping & Payment Options
