Bosch Rexroth | 4WE6D6XOFEG24N9K4V-CSA
4WE6D6X/OFEG24N9K4/V CSA
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6D6X/OFEG24N9K4/V CSA directional valve belongs to the WE Directional Spool Valves series and is produced by Bosch Rexroth. It shifts hydraulic flow paths in automated machinery where electronic control is preferred over pilot lines. With a nominal size of 6, the valve offers compact dimensions while still matching the ISO 4401-03-02-0-05 and NFPA D03 porting pattern for standard subplates. A DIN EN 175301-803 K4 connector carries the 24 V DC supply, and the coil draws 1.25 A under rated conditions. Insulation class F supports higher winding temperature limits, and an IP65 housing shields the assembly from dust and water jets. A concealed N9 manual override permits local actuation during commissioning, while the detent spool return (OF) holds the spool in its last switched position. The D spool symbol defines the internal flow geometry, and internal suppression restricts switch-off overvoltage to 500 V to protect drive electronics.
The hydraulic side is dimensioned for a maximum flow of 80 l/min, letting the valve serve medium-capacity actuators without excessive pressure drop. Work ports P, A, and B can be loaded up to 350 bar, whereas the T port tolerates 210 bar, so return lines can carry moderate back pressure. FKM seals are used throughout, providing chemical resistance in mineral-oil and many synthetic fluid circuits and maintaining tightness at elevated temperatures. The total mass of 1.95 kg aids straightforward handling when installing the dual-solenoid assembly into manifold stacks. By combining the stated flow capacity, pressure ratings, resilient sealing, and detent holding function, the valve supplies reliable on-off control for hydraulically driven automation stages while remaining within its specified electrical and mechanical limits.
Technical Specifications
Electrical Connection
DIN EN 175301-803 (K4)
Ingress Protection (iec 60529)
IP65
Insulation Class (dc)
F
Manual Override
N9 (concealed)
Max Flow (dc)
80 l/min
Max Pressure (p/a/b Ports)
350 bar
Max Switch-off Overvoltage
500 V
Max T Port Pressure (dc)
210 bar
Nominal Size
6
Porting Pattern
ISO 4401-03-02-0-05; NFPA D03
Rated Current (24 V Dc)
1.25 A
Rated Voltage
24 V DC
Seal Material
FKM
Spool Return
Detent (OF)
Spool Symbol
D
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
