Bosch Rexroth | 4WE6D6XOFEG24N9K4QSABG24W
4WE6D6X/OFEG24N9K4QSABG24W
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6D6X/OFEG24N9K4QSABG24W directional spool valve is produced by Bosch Rexroth as part of the WE Directional Spool Valves series, providing on-off control of hydraulic flow paths in automated machinery. It is built to nominal size 6, fitting compact manifolds used in mobile and industrial equipment. The solenoid coil operates from a 24 V DC supply, draws a rated current of 1.25 A, and consumes 30 W to generate the force required to shift the spool. A 100 % duty cycle permits the coil to remain energized continuously during long production runs. Wiring is completed through a plug molded to the DIN EN 175301-803 type K4 interface, and the assembled connector seals the housing to IP65 against dust and water spray. For setup or emergency movement, a concealed manual override labeled N9 lets maintenance staff mechanically shift the spool without electrical power.
The valve contains two spool positions, allowing it to alternate between flow paths across the four main ports that serve pressure, return, and actuator lines. Ports P, A, and B withstand operating pressures up to 350 bar, while the T port is limited to 210 bar, enabling safe tank return. Flow capacity reaches 80 L/min in direct-current operation so actuators receive adequate volume with minimal restriction. Mounting uses the ISO 4401-03-02-0-05 porting pattern, which aligns the valve with standard subplates. Integrated position monitoring designated QS provides 24 V signals from positions a and b, furnishing feedback to control systems about the current spool state. With two solenoids installed, the assembly weighs 1.95 kg, making installation and replacement manageable by a single technician.
Technical Specifications
Coil Voltage
24 V DC
Duty Cycle
100%
Electrical Connection
DIN EN 175301-803 (K4)
Ingress Protection
IP65
Main Ports
4
Manual Override
Concealed (N9)
Max Flow (dc)
80 L/min
Max Operating Pressure (p/a/b)
350 bar
Max Port T Pressure (dc)
210 bar
Nominal Power (dc)
30 W
Nominal Size
6
Porting Pattern
ISO 4401-03-02-0-05
Position Monitoring
QS (a and b), 24 V
Rated Current (24 V Dc)
1.25 A
Spool Positions
2
Valve Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
