Bosch Rexroth | 4WE6D6XOFEG24N9K4-AN
4WE6D6X/OFEG24N9K4 AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6D6X/OFEG24N9K4 AN valve is a hydraulic directional control unit manufactured by Bosch Rexroth within the WE Directional Spool Valves series. It directs pressurized oil to actuators in automated machines and remains suited to continuous use. Size 6 defines its mounting footprint and flow passages, while the ANSI B93.9 porting pattern aligns the four service ports with common manifold blocks. The valve carries four ports so P, T, A, and B lines can be connected in a standard circuit. A detent two-position spool return keeps the spool in place after actuation, eliminating the need for constant coil current. Maximum flow of 80 L/min accommodates medium-capacity cylinders and motors, and the A, B, and P ports withstand system pressures up to 350 bar. The T port tolerates back-pressure up to 210 bar in direct-current operation, so return lines can handle elevated loads. A 100 % duty cycle permits the solenoid to remain energized without overheating during prolonged positioning tasks.
In electrical terms the valve uses a DIN EN 175301-803 three-pole K4 connector, and with that connector in place the enclosure achieves IP65, preventing dust ingress and water jet intrusion in factory environments. The solenoid is powered from a 24 V DC supply, and the coil accepts a ±10 % voltage variation so control cabinets do not need tightly regulated outputs. At nominal voltage the device draws 1.25 A, resulting in a 30 W power requirement that simplifies fuse sizing and power budgeting. A switching capability of 4.2 operations per second supports rapid cycle automation where directional changes are frequent. Despite this performance, the assembly weighs only 1.95 kg, allowing easy installation on manifolds or mounting plates.
Technical Specifications
Duty Cycle
100% ED
Electrical Connection
DIN EN 175301-803, 3-pole (K4)
Ingress Protection
IP65 (with K4)
Max Flow (dc)
80 L/min
Max Pressure A/b/p
350 bar
Max Switching Frequency
4.2 1/s
Max Tank Port T Pressure
210 bar (DC)
Nominal Power
30 W
Nominal Voltage
24 V DC
Porting Pattern
ANSI B93.9
Ports
4
Rated Current
1.25 A
Size
6
Spool Return
Detent (Two-Position)
Voltage Tolerance
±10%
Weight
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
