Bosch Rexroth | 4WE6D6XOFEG24N9DK35L62-AN
4WE6D6X/OFEG24N9DK35L/62 AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6D6X/OFEG24N9DK35L/62 AN directional spool valve is built by Bosch Rexroth as part of the WE Directional Spool Valves series, where it directs hydraulic oil to selected actuator ports in automated machinery. The ISO 4401-03-02-0-05 D03 porting interface defines the subplate pattern so the valve mounts on standard manifolds, while the ANSI B93.9 port assignment keeps the A, B, P, and T passages in a predictable layout. Electrical control is provided through an M12×1 four-pole DK35L connector that simplifies plug-in wiring. A nominal voltage of 24 V DC and a rated current of 1.25 A establish the coil’s electrical load, and the 30 W nominal power reflects the energy drawn during steady operation. The DK35L solenoid may be energized once per second because the maximum switching frequency is 1 Hz. Continuous duty is supported by a 100 percent ED rating, so the coil may remain powered without thermal cycling. An IP65 enclosure resists dust and low-pressure water jets, and an ISO 8752-3×8-St locating pin keeps the body aligned on the subplate.
The valve body with two solenoids weighs 1.95 kg, allowing manual handling during service. Ports A, B, and P withstand operating pressures up to 350 bar, letting the unit work in high-pressure industrial circuits, whereas port T tolerates 210 bar so the tank line remains within safe limits. A rated flow of 80 l/min ensures adequate volume transfer for medium-size cylinders and motors. Nitrile sealing permits hydraulic fluid temperatures up to 80 °C, maintaining elasticity under typical machine ambient conditions. System reliability depends on fluid cleanliness; therefore, oil must be filtered to ISO 4406 class 20/18/15 to limit particle-induced wear. These hydraulic, thermal, and contamination limits define the service envelope, enabling the spool to shift precisely without sticking throughout continuous operation.
Technical Specifications
Connector Type
M12x1 4-Pole (DK35L)
Duty Cycle
100% ED
Fluid Cleanliness
ISO 4406 20/18/15
Hydraulic Fluid Temp (max, Nbr)
+80 °C
Ingress Protection
IP65
Locating Hole Pin
ISO 8752-3x8-St
Max Flow (dc)
80 l/min
Max Operating Pressure (ports A/b/p)
350 bar
Max Switching Frequency
1 1/s (DK35L)
Max Tank Port Pressure (port T, Dc)
210 bar
Nominal Power
30 W
Nominal Voltage
24 V DC
Port Assignment
ANSI B93.9 (AN)
Porting Interface
ISO 4401-03-02-0-05 (D03)
Rated Current (24 V Dc)
1.25 A
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
