Bosch Rexroth | 4WE6D6XOFEG24N9DK35L-ANSO43A-1805
4WE6D6X/OFEG24N9DK35L ANSO43A-1805
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6D6X/OFEG24N9DK35L ANSO43A-1805 valve is manufactured by Bosch Rexroth within the WE Directional Spool Valves series. It shifts hydraulic flow paths to actuators or returns, supporting automated machine functions. The coil is designed for a 24 V direct-current supply and draws a rated current of 1.25 A, with a nominal power demand of 30 W. A voltage tolerance of ±10 % allows stable actuation under moderate supply variations, and the device can run continuously because it is specified for a 100 % duty cycle in S1 operation. The detachable solenoid uses an M12×1 four-pole connector marked DK35L to simplify wiring, while the enclosure meets IP65 so it withstands dust ingress and low-pressure water jets. During operation the coil surface may reach 120 °C, so routing of adjacent cables must accommodate that temperature. Spool centering is omitted; instead a detent return identified by code OF holds the spool in the selected position without continuous power.
The hydraulic section tolerates operating pressures up to 350 bar and passes a maximum direct-current flow of 80 l/min, enabling medium-capacity actuator circuits that demand both high pressure and steady volume. The mounting face follows ISO 4401-03-02-0-05 and matches the NFPA D03 size, so the valve fits standard sub-plates using the ANSI B93.9 porting pattern without adapters. A concealed manual override coded N9 lets technicians shift the spool during commissioning, and the override is limited to a tank pressure of 50 bar to protect the seal package. These mechanical features favor maintenance procedures in confined manifolds. Installation is aided by the compact WE series envelope, and the interface dimensions allow stacking with other modules on the same manifold. Together these characteristics support precise, electrically controlled direction changes in hydraulic automation systems without external pilot lines.
Technical Specifications
Coil Max Surface Temperature
120 °C
Duty Cycle
100% (S1)
Electrical Connection
M12x1 4-pole (DK35L)
Ingress Protection
IP65
Manual Override
Concealed (N9)
Manual Override Max Tank Pressure
50 bar
Max Flow (dc)
80 l/min
Max Operating Pressure
350 bar
Mounting Interface
ISO 4401-03-02-0-05
Nfpa Mounting
D03
Nominal Power (dc)
30 W
Porting Pattern
ANSI B93.9
Rated Current (24 V Dc)
1.25 A
Rated Voltage (dc)
24 V
Spool Return
Detent (OF)
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
