4WE6D6X/OFEG24N9DK25L/62

The 4WE6D6X/OFEG24N9DK25L/62 directional spool valve belongs to the WE Directional Spool Valves series and is built by Bosch Rexroth for hydraulic automation where electric actuation selects flow paths. Sized as a 6 valve, it is energized with a 24 VDC supply and draws a rated current of 1.25 A, equating to a nominal coil demand of 30 W. The solenoid is specified for a 100 % duty cycle, so continuous energization is permitted until the surface of the coil reaches its limit of 120 °C. Spool position is maintained mechanically by a detent arrangement identified as OF, eliminating the need for holding power after switching. When service access is required, a concealed N9 manual override lets personnel shift the spool without disturbing electrical circuits. These characteristics permit straightforward integration of the valve into control panels that must keep selected actuator directions locked even after power removal.

Electrical termination is handled through a 5-pole Mini-Change connector coded DK25L, providing sealed quick-disconnect wiring that matches mobile and stationary equipment harnesses. An IP65 ingress rating protects the enclosure against dust and water jets encountered on typical machinery. The subplate interface follows ISO 4401-03-02-0-05 (NFPA D03), and a locating hole fitted with a locking pin (/62) ensures accurate alignment during assembly. Hydraulic limits include a maximum operating pressure of 350 bar at ports A, B, and P, a permissible tank port backpressure of 210 bar at t and Dc, and a through-flow capability of 80 l/min under direct current operation. Together these values define the performance envelope for cylinders or motors that require rapid yet controlled direction changes at high system pressure. The specified features make the unit suitable for duty on manifolds that demand reliable flow direction control without additional mounting adapters or environmental covers.