Bosch Rexroth | 4WE6D6XOFEG24N9DK24L2
4WE6D6X/OFEG24N9DK24L2
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6D6X/OFEG24N9DK24L2 valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and directs hydraulic flow to automate cylinder or motor movement. Its size 6 form factor fits compact control blocks while still providing adequate passage area. The spool offers 2 positions so a single solenoid can alternate between two flow paths, and the detent return (OF) keeps the chosen position without continuous coil power. Installation is straightforward because the body matches the ISO 4401-03-02-0-05 mounting interface, and tightening the screws to 7 Nm secures the seal set without distorting the manifold surface. Electrical hookup is handled through an M12×1 4-pole connector, simplifying pre-wired harness use on mobile machinery. The coil accepts 24 V DC and draws a rated current of 1.25 A, allowing direct operation from common machine controllers without intermediate relays.
The solenoid is engineered for a 100 percent duty cycle (S1), so it can stay energized continuously during long process runs. A nominal power draw of 30 W limits heat rise and helps preserve oil viscosity. With an IP65 enclosure the valve resists dust and low-pressure water jets, making it suitable for outdoor frames and wash-down zones. A concealed manual override (N9) lets technicians shift the spool during setup while preventing accidental activation in service. Hydraulically, the unit passes up to 80 l/min, giving it capacity for medium-flow circuits, and withstands a maximum operating pressure of 350 bar for high-force tasks. A switching frequency of 4.2 cycles per second supports rapid directional changes in automated presses or handling axes. The coil driver tolerates switch-off overvoltage peaks up to 500 V, protecting control electronics from inductive transients.
Technical Specifications
Connector Type
M12x1 4-pole
Duty Cycle
100% (S1)
Ingress Protection
IP65
Manual Override
Concealed (N9)
Max Flow (dc)
80 l/min
Max Operating Pressure
350 bar
Max Switching Frequency
4.2 1/s
Mounting Interface
ISO 4401-03-02-0-05
Mounting Screw Torque
7 Nm
Nominal Power
30 W
Nominal Voltage
24 V DC
Rated Current
1.25 A
Size
6
Spool Positions
2
Spool Return
Detent (OF)
Switch-off Overvoltage (max)
500 V
1620 Old Apex Road
Shipping & Payment Options
