Bosch Rexroth | 4WE6D6XOFEG24N6K4
4WE6D6X/OFEG24N6K4
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6D6X/OFEG24N6K4 is produced by Bosch Rexroth within the WE Directional Spool Valves series and shifts flow paths in hydraulic automation systems by moving a size 6 spool when either solenoid is energized. The subplate interface follows ISO 4401-03-02-0-05, so the valve can be mounted on standard NG6 manifolds. A maximum flow rate of 80 l/min supports medium-capacity actuators, while ports A, B, and P withstand working pressure up to 350 bar. The electromagnetic drive runs on a nominal 24 V DC supply, draws 1.25 A under rated load, and tolerates ±10 % voltage variation found in industrial networks. Each coil consumes 30 W and is specified for continuous service at a 100 % duty cycle, letting the spool remain shifted indefinitely. With both solenoids installed the assembly weighs 1.95 kg, which influences manifold support selection.
The coil surface may reach 120 °C during prolonged operation, so adjacent parts must tolerate elevated temperatures. An IP65 enclosure prevents dust ingress and low-pressure water jets from reaching internal components when the plug is correctly sealed. Electrical connection is made through a K4 connector conforming to DIN EN 175301-803, simplifying harness assembly. A large mushroom-style manual override designated N6 provides local actuation and is not lockable to avoid accidental permanent shifting. Because the valve is built without a spring return, spool centering relies on an OF detent that holds the selected position after the coil is de-energized. The return port T is rated for 210 bar, allowing back-pressure to develop in regenerative circuits without damaging internal seals.
Technical Specifications
Coil Max Surface Temp
120 C
Connector Type
K4 (DIN EN 175301-803)
Detent
OF
Duty Cycle
100% ED
Ingress Protection
IP65
Manual Override Type
N6 (Mushroom, Large, Not Lockable)
Max Flow (dc)
80 l/min
Max Pressure (port T, Dc)
210 bar
Max Pressure (ports A/b/p)
350 bar
Nominal Power (dc Coil)
30 W
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (24 V)
1.25 A
Spring Return
None
Voltage Tolerance
±10%
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
