Bosch Rexroth | 4WE6D6XEW110N9DK25L62-AN
4WE6D6X/EW110N9DK25L/62 AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6D6X/EW110N9DK25L/62 AN directional spool valve is produced by Bosch Rexroth within the WE Directional Spool Valves series. It directs hydraulic flow in automated circuits and is intended for subplate mounting in size 6 cavities. The porting pattern follows ANSI B93.9 (NFPA D03), so the valve can replace similar D03 units without modifying the manifold. A coil rated at 110 V AC 50/60 Hz energizes the solenoid; the ±10 % voltage tolerance keeps performance stable when supply levels vary. During energization the coil draws 220 VA at switch-on to create rapid magnetic force, then settles to 50 VA holding power for continuous duty. A 100 percent duty cycle allows the valve to remain magnetized indefinitely without overheating, which suits closed-loop control tasks. These electrical characteristics combine to provide reliable directional control in systems that need frequent but sustained actuation.
Environmental and hydraulic limits further define how the valve is applied. An IP65 enclosure seals the solenoid against dust and water jets, and a DK25L Brad Harrison five-pole connector offers quick electrical hookup while maintaining the seal. A concealed manual override marked N9 lets maintenance staff shift the spool when power is unavailable. The valve handles 350 bar on pressure, A, and B ports, while the tank port is limited to 160 bar, letting it pair with high-pressure pumps yet protect the return line. Flow up to 60 l/min can pass without exceeding rated pressure drop, and the assembly can switch directions twice per second, supporting moderate cycling rates. Accurate alignment on the manifold is provided by an ISO 8752 3×8 locating pin identified by /62. Together these mechanical and hydraulic limits ensure precise, leak-free operation in industrial hydraulic automation.
Technical Specifications
Duty Cycle
100% ED
Electrical Connection
DK25L (Brad Harrison 5-Pole)
Holding Power
50 VA
Ingress Protection
IP65
Locating Hole
ISO 8752-3x8 Pin (/62)
Manual Override
Concealed (N9)
Max Flow (ac)
60 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Switching Frequency (ac)
2 1/s
Max Tank Port Pressure (ac)
160 bar
Nominal Voltage
110 V AC (50/60 Hz)
Porting Pattern
ANSI B93.9 (NFPA D03)
Size
6
Switch-on Power
220 VA
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
