Bosch Rexroth | 4WE6D6XEG96N5K4V
4WE6D6X/EG96N5K4/V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6D6X/EG96N5K4/V directional spool valve belongs to the WE Directional Spool Valves series manufactured by Bosch Rexroth for hydraulic automation circuits. The solenoid coil operates on a 96 V DC supply so that control cabinets with this voltage can energize the valve directly. At that supply it draws 0.33 A, producing a nominal electrical load of 30 W that must be accounted for in power budgeting. The winding supports a 100 % S1 duty cycle, allowing continuous energization without overheating during extended machine cycles. Voltage tolerance is ±10 %, giving the device resilience to typical industrial line variations. Electrical connection is made through a K4 plug that follows EN 175301-803 Form A, enabling quick field replacement. To limit inductive kickback the coil is built to withstand up to 500 V at switch-off, and a 192 V suppressor is recommended to keep the transient below that limit. Mechanically, the actuator accommodates command changes up to 4.2 cycles per second for responsive flow control.
The hydraulic section is rated for a maximum pressure of 350 bar and can pass up to 80 l/min, making it suitable for medium-flow servo cylinders and motors. A lockable mushroom manual override designated N5 lets technicians shift the spool during power loss and remains secure against accidental activation; this feature tolerates tank pressures up to 50 bar when used. Mounting follows the ISO 4401-03-02-0-05 porting pattern so the valve can bolt onto standard CETOP 03 sub-plates without adapters. FKM elastomer seals withstand common mineral oils and elevated temperatures to maintain leakage integrity over long service intervals. The solenoid housing carries an IP65 rating, protecting the coil from dust ingress and water jets encountered on open machine frames. These characteristics combine to deliver dependable directional control in industrial hydraulic manifolds.
Technical Specifications
Coil Voltage
96 V DC
Duty Cycle
100% (S1)
Electrical Connector
K4 (EN 175301-803 Form A)
Ingress Protection
IP65
Manual Override
Lockable Mushroom (Large) N5
Manual Override Tank Pressure Max
50 bar
Max Flow (dc)
80 l/min
Max Operating Pressure
350 bar
Max Switch-off Overvoltage
500 V
Max Switching Frequency
4.2 1/s
Nominal Power (dc)
30 W
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (96 V Dc)
0.33 A
Recommended Suppressor Voltage
192 V
Seal Material
FKM
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
