1-888-551-3082 | 1-919-443-0207 | sales@hydraulicpartsusa.com
You will get an email confirming we have received your inquiry.
A team member will review your request and be in touch concerning any questions or specifications.
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6D6X/EG24N9K72LQMBG24 AN valve is manufactured by Bosch Rexroth within the WE Directional Spool Valves series. Intended to route pressurized oil in hydraulic automation, it adopts the ANSI B93.9 porting pattern so standardized sub-plates can be used. The service ports P, A, and B tolerate up to 350 bar, while the T port is limited to 210 bar for safe return-line operation. A maximum flow of 80 l/min supports moderate actuator sizes without excessive loss. Coil excitation relies on a 24 V DC supply, and the winding draws 1.25 A under nominal conditions. Continuous energization is permitted because the duty cycle is 100 % (S1), allowing the spool to stay shifted for extended machine sequences.
The solenoid is wired through a K72L M12 × 1 four-pin connector, which streamlines installation in multi-valve manifolds. With this connection the assembly can switch directions at up to 1 Hz, and turn-off transients remain below 500 V to ease stress on control electronics. A concealed N9 manual override lets maintenance personnel move the spool without electrical power. The magnetic circuit is built to insulation class F and is classified as protection class III under VDE 0580, while the housing achieves IP65 to block dust and low-pressure water jets. Electrical consumption is 30 W at the stated voltage, and the unit weighs 1.95 kg when both solenoids are fitted, minimizing load on manifold brackets.
Duty Cycle
100% (S1)
Electrical Connection
M12x1 4-Pin (K72L)
Insulation Class (dc)
F
Manual Override Type
Concealed (N9)
Max Switch-off Overvoltage
500 V
Max Switching Frequency (k72l)
1 Hz
Maximum Flow (dc)
80 l/min
Maximum Operating Pressure (p/a/b)
350 bar
Nominal Power (dc)
30 W
Nominal Voltage
24 V DC
Porting Pattern
ANSI B93.9
Protection Class
IP65
Protection Class (vde 0580)
III
Rated Current (24 V Dc)
1.25 A
Tank Port Max Pressure (dc)
210 bar
Weight (two Solenoids)
1.95 kg
Worldwide Shipping with FedEx and UPS.
We accept all major credit cards
1 year Hydraulic Parts USA warranty on ALL products
We are a Better Business Bureau A+ business