Bosch Rexroth | 4WE6D6XEG24N9K4QMAG24V
4WE6D6X/EG24N9K4QMAG24/V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6D6X/EG24N9K4QMAG24/V directional spool valve is produced by Bosch Rexroth for the WE Directional Spool Valves series. It directs hydraulic flow to actuators and cylinders in automation circuits. The unit is built in nominal size 6, and the spool marked by symbol D establishes the flow paths required for its three-position function. A porting pattern conforming to ISO 4401-03-02-0-05 supports subplate mounting in compact manifolds. The solenoid coil works on 24 V DC and draws a rated current of 1.25 A, delivering 30 W of nominal power. Continuous energization is permitted because the duty cycle is specified at 100 percent ED. Connection to the control wiring is made through a K4 plug that follows DIN EN 175301-803. A concealed manual override coded N9 allows service movement of the spool without electrical power, while FKM sealing elements resist mineral oils and many synthetic fluids.
The hydraulic section passes a maximum direct-current flow of 80 liters per minute, allowing medium-size actuators to move at required speeds, and the specified flow is matched to the metering geometry so line losses stay within acceptable limits. Operating pressure can reach 350 bar on pressure, A, and B ports, while the tank line is limited to 210 bar to protect return components and reduce heat generation. Position feedback is available because the valve carries a QM type position switch powered by a 24 V DC supply, and the monitored position is the a side of the spool. This electrical confirmation supports safety interlocks in automated machinery. The stated ratings allow the valve to run continuously in compact power units that handle demanding load cycles without overheating or fluid leakage.
Technical Specifications
Coil Voltage
24 V DC
Duty Cycle
100% ED
Electrical Connection
K4 (DIN EN 175301-803)
Manual Override
N9 (Concealed)
Max Flow (dc)
80 l/min
Max Operating Pressure (p, A, B)
350 bar
Max Tank Port Pressure (t)
210 bar
Monitored Position
a
Nominal Power
30 W
Nominal Size
6
Porting Pattern
ISO 4401-03-02-0-05
Position Switch Supply
24 V DC
Position Switch Type
QM
Rated Current (24 V)
1.25 A
Seal Material
FKM
Spool Symbol
D
1620 Old Apex Road
Shipping & Payment Options
