Bosch Rexroth | 4WE6D6XEG24N9DK25LV62
4WE6D6X/EG24N9DK25L/V/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6D6X/EG24N9DK25L/V/62 valve is part of the WE Directional Spool Valves series produced by Bosch Rexroth for hydraulic automation systems that require reliable flow direction control. It follows the ISO 4401-03-02-0-05 porting pattern so it can mount on standard subplates without adaptation. Ports P, A, and B withstand up to 350 bar, while the T port is rated for 210 bar, allowing safe return-line operation. A maximum flow of 80 l/min supports medium-duty circuit demands, and FKM seals maintain tightness when exposed to common hydraulic fluids and elevated temperatures. The enclosure achieves IP65 protection to resist dust ingress and low-pressure water jets during machine wash-down. Each solenoid operates on a 24 V DC supply and draws 1.25 A, and the coil surface may reach 120 °C during continuous duty without exceeding design limits.
Thermal endurance of the winding is confirmed by insulation class F, so the coil maintains dielectric integrity under sustained heat. Wiring is performed through a 5-pole Mini-Change connector identified as DK25L, enabling swift replacement in the field. A concealed manual override, coded N9, lets technicians shift the spool during commissioning or in the event of power loss. Fluid cleanliness must be kept at ISO 4406 20/18/15 to preserve internal clearances and reduce wear. Installation is assisted by an ISO 8752-3×8-St locating hole that pins the valve securely to the manifold. With two solenoids the assembly weighs 1.95 kg, keeping manifold loads low on mobile equipment. An MTTFd of 300 years indicates a very low probability of dangerous failure throughout the service life of typical hydraulic machinery.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Coil Surface Temperature (max)
120 °C
Coil Voltage
24 V DC
Electrical Connection
5‑Pole Mini‑Change (DK25L)
Insulation Class (dc)
F
Locating Hole
ISO 8752-3x8-St
Manual Override
Concealed (N9)
Max Flow (dc)
80 l/min
Max Operating Pressure (p,a,b)
350 bar
Mttfd
300 years
Port T Max Pressure (dc)
210 bar
Porting Pattern
ISO 4401-03-02-0-05
Protection Class (en 60529)
IP65
Rated Current (24 Vdc)
1.25 A
Seal Material
FKM
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
