4WE6D6X/EG24N9DK25L/62

The 4WE6D6X/EG24N9DK25L/62 directional spool valve belongs to the WE Directional Spool Valves series and is produced by Bosch Rexroth. Designed to shift hydraulic flow paths in automated machinery, it is energized with a 24 V DC supply, and a rated current of 1.25 A drives each solenoid to full stroke. The DK25L 5-pole electrical connector with an integrated indicator light offers quick feedback on coil status while simplifying plug-in wiring. Windings built to insulation class F permit continuous service, and a permissible coil surface temperature up to 120 °C prevents overheating during extended duty cycles. An IP65 enclosure rating seals the housing against dust and low-pressure water jets, supporting outdoor or wash-down installations. The concealed N9 manual override lets maintenance personnel shift the spool mechanically when power is absent, and the ISO 4401-03-02-0-05 porting pattern together with a locating hole secured by an ISO 8752-3×8-St locking pin keeps the valve precisely seated on the subplate.

The hydraulic end of the valve accommodates a maximum flow of 80 l/min so medium-sized actuators can be supplied without excessive pressure drop. Working ports p, a, and b tolerate operating pressures up to 350 bar, while the tank port is limited to 210 bar to protect return-line components. Electrical wear is contained by a switch-off overvoltage limit of 500 V, reducing the risk of coil insulation breakdown. A mean time to dangerous failure of 300 years supports use in safety-related circuits that demand extended reliability. In spite of its dual-solenoid configuration, the unit weighs only 1.95 kg, which simplifies manifold assembly and servicing. These performance figures confirm the valve’s suitability for precise, high-pressure hydraulic controls where compact dimensions, dependable electrical behavior, and stable flow characteristics are mandatory.