Bosch Rexroth | 4WE6D6XEG24N9DK24LB10-AN
4WE6D6X/EG24N9DK24L/B10 AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6D6X/EG24N9DK24L/B10 AN valve belongs to the WE Directional Spool Valves series and is manufactured by Bosch Rexroth for controlling flow paths in hydraulic automation. A nominal voltage of 24 V DC permits operation from common control supplies, and at this level the coil draws a rated current of 1.25 A to generate consistent magnetic force. Nominal power consumption is 30 W, limiting heat buildup in the electrical cabinet. An M12×1 four-pole connector (DK24L) provides quick electrical hookup for straightforward replacement. Continuous energization is possible because the solenoid supports a 100 percent duty cycle, allowing the spool to remain shifted without cooling pauses. An IP65 ingress protection rating seals the housing against dust and low-pressure water so the valve can be placed in wash-down zones. Compliance with VDE 0580 protection class III keeps hazardous voltages away from the coil housing. A concealed manual override designated N9 lets maintenance staff shift the spool manually while shielding the push pin from contamination.
The hydraulic section is rated for 350 bar on ports P, A, and B, enabling use in high-pressure circuits. Tank port pressure may reach 210 bar during normal direct-current actuation without exceeding design limits, maintaining reliability on return lines. Maximum flow capability of 80 L/min supports medium-size actuators with minimal pressure loss. When the manual override is operated the tank line must stay below 50 bar to avoid damaging the override mechanism. A 1.0 mm throttle insert in port P, identified by code B10, tempers inlet flow for smoother spool transitions. The mounting interface follows ISO 4401-03-02-0-05, ensuring compatibility with size 03 subplates. Port galleries match ANSI B93.9 so the valve aligns with North American manifold layouts. Cleanliness class ISO 4406 20/18/15 specifies the filtration level required to prevent particle-induced sticking of the spool.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Duty Cycle
100% ED
Electrical Connector
M12x1 4-Pole (DK24L)
Ingress Protection
IP65
Manual Override
Concealed (N9)
Max Flow (dc)
80 l/min
Max Manual Override Tank Pressure
50 bar
Max Operating Pressure (p/a/b)
350 bar
Max Tank Port Pressure (dc)
210 bar
Mounting Interface
ISO 4401-03-02-0-05
Nominal Power (dc)
30 W
Nominal Voltage
24 V DC
Porting Pattern
ANSI B93.9
Protection Class (vde 0580)
Class III
Rated Current (24 V Dc)
1.25 A
Throttle Insert
Port P 1.0 mm (B10)
1620 Old Apex Road
Shipping & Payment Options
