Bosch Rexroth | 4WE6D6XEG24N9DK24L2V62SO43A-1791
4WE6D6X/EG24N9DK24L2/V/62SO43A-1791
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6D6X/EG24N9DK24L2/V/62SO43A-1791 valve is produced by Bosch Rexroth within the WE Directional Spool Valves series to route hydraulic flow in automated machinery. A maximum operating pressure of 350 bar on ports a, b, and p allows the spool to control high-pressure circuits, while a maximum direct-current flow of 80 l/min defines the throughput the manifold can accommodate. The ISO 4401-03-02-0-05 porting pattern matches common subplates so installation does not require adapter blocks. A 24 V DC nominal coil voltage and a rated current draw of 1.25 A specify the power supply needed for dependable shifting. The 4-pole M12×1 electrical connector provides a quick-disconnect interface that maintains contact integrity during vibration. A concealed manual override lets maintenance staff move the spool without energizing the coil yet stays recessed to avoid accidental use. With both solenoids installed, the assembly weighs 1.95 kg, a value that influences manifold and panel load calculations.
An IP65 ingress protection rating prevents dust and low-pressure water jets from reaching the coil, and insulation group III per VDE 0580 defines the dielectric spacing inside the winding. The coil surface is permitted to reach up to 120 °C, so thermal checks must confirm ambient and duty cycle limits. FKM sealing elements tolerate mineral oil and elevated temperatures, supporting long service life in aggressive fluids. Fluid cleanliness must not exceed ISO 4406 20/18/15 to keep the spool lands free of abrasive wear. Return-line back-pressure can rise to 210 bar on port t in direct-current service without impairing function. A mean time to dangerous failure of 300 years gives a reliability figure for safety assessments. The ISO 8752-3×8-St locating hole centers the body on the subplate, ensuring precise alignment of pressure passages during assembly.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Electrical Connection
4-Pole M12x1 (DK24L)
Ingress Protection
IP65
Locating Hole
ISO 8752-3x8-St
Manual Override
Concealed (N9)
Max Coil Surface Temp
120 C
Max Operating Pressure (a,b,p)
350 bar
Max Tank Port Pressure (t)
210 bar (DC)
Maximum Flow (dc)
80 l/min
Mttfd
300 years
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Protection Class (vde 0580)
III
Rated Current (24 V Dc)
1.25 A
Seal Material
FKM
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
