Bosch Rexroth | 4WE6D6XEG24N9DK24L2B10VSO43A-1791
4WE6D6X/EG24N9DK24L2/B10VSO43A-1791
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6D6X/EG24N9DK24L2/B10VSO43A-1791 directional spool valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and is intended to shift hydraulic flows in automated circuits. It mounts on sub-plates that follow the NFPA T3.5.1 D03 interface and shares the ISO 4401-03-02-0-05 porting pattern for consistent manifold layouts. Coil supply requires 24 V DC with a ±10 percent tolerance; at this voltage the coil draws 1.25 A and consumes 30 W. Power is fed through an M12×1 4-pin connector labeled DK24L, allowing plug-and-play wiring in control cabinets. Continuous energization is possible because the solenoid is rated for a 100 percent duty cycle. A concealed manual override identified by code N9 lets technicians shift the spool without electrical power. For fine metering, a throttle insert with a 1.0 mm orifice is factory fitted in port P under option B10.
Environmental sealing reaches IP65 so the valve resists dust ingress and low-pressure water jets once the mating connector is installed. The pressure limits are 350 bar on ports A, B, and P, while tank port T endures up to 210 bar during dynamic duty cycles. Maximum flow with direct current excitation is 80 l/min, enabling medium-sized actuators to operate at full speed. Secure attachment calls for four mounting screws tightened to 7 Nm; correct torque maintains flatness between the valve body and the manifold plate. The mean time to dangerous failure is calculated at 300 years, supporting long service intervals in production machinery.
Technical Specifications
Duty Cycle
100% ED
Electrical Connection
M12x1 4-pin (DK24L)
Ingress Protection
IP65
Manual Override
Concealed (N9)
Max Flow (dc)
80 l/min
Max Operating Pressure (a/b/p)
350 bar
Max Tank Port Pressure (dc)
210 bar
Mounting Interface
NFPA T3.5.1 D03
Mounting Screw Torque
7 Nm
Mttfd
300 years
Nominal Power
30 W
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Rated Current
1.25 A
Throttle Insert
Port P Ø1.0 mm (B10)
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
