Bosch Rexroth | 4WE6D6XEG24N9DK24L2B10
4WE6D6X/EG24N9DK24L2/B10
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6D6X/EG24N9DK24L2/B10 directional spool valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and routes pressurized fluid to control cylinders or motors in hydraulic automation. It uses the ISO 4401-03-02-0-05 porting pattern so it can be mounted on common NG6 subplates. A maximum operating pressure of 350 bar at ports P, A, and B lets the unit work in high-pressure circuits, while the tank port is limited to 210 bar to protect return-line components. The valve passes up to 80 l/min of flow, supporting medium-capacity drives, and a 1.0 mm throttle insert in port P moderates pressure surges. Fluid cleanliness must reach ISO 4406 code 20/18/15 to minimize spool wear. The enclosure is rated IP65, enabling installation where dust and water jets are present. A concealed N9 manual override allows local actuation during setup, and this feature is restricted to 50 bar tank pressure to prevent seal damage.
The solenoid coil operates from a 24 V DC supply so it can be driven directly from safety extra-low-voltage controllers; the rated current is 1.25 A, allowing simple sizing of power outputs. Electrical connection is made with an M12×1 four-pole plug, providing quick, keyed wiring in tight panels. The coil surface may reach 120 °C under continuous duty, which matches the F insulation class assigned to the winding. Overall electrical safety is classified to Protection Class III, limiting the device to low-voltage systems without additional grounding. A mean time to dangerous failure of 300 years demonstrates a very high reliability level for long-life machinery. These electrical characteristics complement the hydraulic data listed earlier and define the operating limits for dependable service.
Technical Specifications
Cleanliness Class Iso 4406 (c)
20/18/15
Coil Max Surface Temperature
120 C
Electrical Connector
M12x1 4-pole
Ingress Protection
IP65
Insulation Class (dc)
F
Manual Override
Concealed (N9)
Manual Override Max Tank Pressure
50 bar
Maximum Flow (dc)
80 l/min
Maximum Operating Pressure (p, A, B)
350 bar
Maximum Tank Port Pressure (dc)
210 bar
Mttfd
300 Years
Porting Pattern
ISO 4401-03-02-0-05
Protection Class
III
Rated Coil Voltage
24 V DC
Rated Current (24 V Dc)
1.25 A
Throttle Insert Orifice (p)
1.0 mm
1620 Old Apex Road
Shipping & Payment Options
