Bosch Rexroth | 4WE10W3XCG24N9K4V
4WE10W3X/CG24N9K4/V
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE10W3X/CG24N9K4/V directional spool valve is produced by Bosch Rexroth for the WE Directional Spool Valves series and is intended to shift hydraulic flow paths in automated circuits. It uses the W spool symbol to define a crossover flow pattern suited to rapid cylinder reversal, while its nominal size 10 establishes the interface dimensions for sandwich mounting. A wet-pin DC solenoid drives the spool and operates on a 24 V DC supply so the unit connects directly to common machine control voltages. Continuous energization is possible because the duty cycle is rated at 100 percent, and a maximum switching frequency of 15 000 cycles per hour supports high-speed sequencing. Wiring is handled through a three-pole EN 175301-803 connector, and a concealed manual override allows local actuation for setup or maintenance without disturbing electrical plugs. The assembly weighs 4.4 kg when equipped with two K4 solenoids, a consideration for manifold loading and support.
The ISO 4401-05-04-0-05 porting pattern matches standard subplates so the valve can replace similar components without re-machining. A center flow cross-section of 2.5 mm² determines the throttling area that controls pressure drop across the metering notches. The design passes up to 120 L/min, making it suitable for medium-capacity work circuits. Ports P, A, and B tolerate operating pressures to 315 bar, while port T is limited to 160 bar to protect return-line plumbing. FKM seals provide chemical resistance to modern hydraulic fluids and elevated temperatures, and an IP65 rating is achieved when the mating connector is fitted, guarding the solenoids against dust ingress and low-pressure water jets. The valve body carries a concealed override as noted earlier, and all remaining service points are protected by this enclosure rating to maintain reliability in harsh plant environments.
Technical Specifications
Center Cross-section (w)
2.5 mm²
Duty Cycle
100%
Electrical Connector
EN 175301-803 (3-pole)
Manual Override
Concealed
Max Flow
120 L/min
Max Operating Pressure (p,a,b)
315 bar
Max Pressure Port T
160 bar
Max Switching Frequency (dc)
15000 1/h
Nominal Size
10
Porting Pattern
ISO 4401-05-04-0-05
Protection Class
IP65 (with connector)
Seal Material
FKM
Solenoid Type
Wet-Pin DC
Spool Symbol
W
Supply Voltage
24 V DC
Weight (two Solenoids, K4)
4.4 kg
1620 Old Apex Road
Shipping & Payment Options
