Bosch Rexroth | VT-DFPE-A-2XG24K02A0VV
VT-DFPE-A-2X/G24K0/2A0V/V
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The VT-DFPE-A-2X/G24K0/2A0V/V belongs to the VT-DFP Directional Valves series from Bosch Rexroth and is installed to route flow paths in automated hydraulic circuits. A switchable pressure controller, indicated by the letter A, permits on-demand pressure limitation without adding external components. The unit is powered from a 24 V DC supply and receives all conductors through an X1 central connection, reducing wiring complexity. During rapid shifts the coil current can reach 1.25 A, while continuous holding is limited to 0.6 A to control heat rise. An IP65 enclosure shields the electronics from dust and water jets encountered on mobile or industrial machinery. Internal sealing elements are made of FKM, enabling compatibility with a wide range of mineral and synthetic fluids. The assembly weighs 2.25 kg, so one technician can position it on a manifold without lifting aids.
Fluid entering the valve must meet ISO 4406 (c) 18/16/13 cleanliness to prevent abrasive damage to sliding parts. Because the K0 option omits a mating connector, users must supply the plug that fits the X1 interface. Acceptable hydraulic fluid temperatures range from –20 °C to +70 °C, allowing cold-start operation and sustained high-temperature service. Port T withstands return pressures up to 100 bar, whereas ports A and P accommodate working pressures of 400 bar for demanding actuator loads. The housing is fastened with four M6 × 40 screws that comply with ISO 4762, and each screw requires a tightening torque of 7 Nm to maintain the seal. Together these parameters define the mechanical limits, environmental boundaries, and installation details needed for reliable service in hydraulic automation.
Technical Specifications
Additional Function
Pressure Controller Switchable (A)
Cleanliness Class
ISO 4406 (c) 18/16/13
Electrical Connection
X1 Central Connection
Hydraulic Fluid Temp Max
+70 °C
Hydraulic Fluid Temp Min
-20 °C
Mass
2.25 kg
Mating Connector
Not Included (K0)
Max Pressure (port T)
100 bar
Max Pressure (ports A,p)
400 bar
Maximum Current
1.25 A
Mounting Screws
4 × M6 × 40 (ISO 4762)
Protection Class
IP65
Rated Current (static)
0.6 A
Seal Material
FKM
Supply Voltage
24 V DC
Tightening Torque
7 Nm
1620 Old Apex Road
Shipping & Payment Options
