Bosch Rexroth | VT-DFPE-A-22G24K00A1EV-014
VT-DFPE-A-22/G24K0/0A1E/V-014
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The VT-DFPE-A-22/G24K0/0A1E/V-014 valve belongs to the VT-DFP Directional Valves series and is produced by Bosch Rexroth for closed-loop hydraulic automation. It relies on a nominal supply of 24 VDC, with an allowed range from 21 V to 35 V, so control electronics stay stable during plant voltage fluctuations. The electronics draw a rated current of 0.6 A during normal modulation, while a 1.25 A maximum accommodates startup or step changes in spool position. Command signals enter through an analog interface that presents 100 kΩ input resistance, preventing excessive load on upstream controllers. A separate 100 Ω current input path converts standardized 4–20 mA references into valve position commands. Feedback is available as a ±10 V analog output, allowing monitoring devices to track actual spool displacement for closed-loop tuning. These electrical limits define how the unit integrates with PLC analog cards and power supplies.
The digital enable line recognizes a high state at 14 V, ensuring compatibility with typical 24 V logic while rejecting noise below that threshold. For environmental endurance, the housing carries an IP65 rating so sealed connectors block dust and low-pressure water jets on mobile machinery. Ambient temperature is permitted up to 60 °C, and hydraulic fluid may reach 70 °C before derating, which protects internal coils and seals. Proper operation also depends on fluid viscosity not exceeding 380 mm²/s, sustaining predictable flow across the orifice. Cleanliness must meet ISO 4406 code 18/16/13 to limit wear on the precision spool. The pressure stage supports 350 bar on ports P and A, while the tank port tolerates 100 bar, matching modern high-pressure circuits. Together these hydraulic limits and environmental ratings define the valve’s working envelope within motion control systems.
Technical Specifications
Ambient Temperature Max
60 0C
Analog Current Input Load
100 A9
Analog Input Resistance
100 kA9
Analog Output (uout1)
±10 V
Digital Input High Level
14 V
Fluid Cleanliness Class
18/16/13 (ISO 4406)
Hydraulic Fluid Temp Max
70 0C
Ingress Protection
IP65
Max Operating Pressure (p, A)
350 bar
Max Operating Pressure (t)
100 bar
Maximum Current
1.25 A
Rated Current
0.6 A
Supply Voltage
24 VDC
Supply Voltage Lower Limit
21 V
Supply Voltage Upper Limit
35 V
Viscosity Max
380 mm b2/s
1620 Old Apex Road
Shipping & Payment Options
