Bosch Rexroth | PV7-1X16-30RE01MC0-08
PV7-1X/16-30RE01MC0-08
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PV7-1X/16-30RE01MC0-08 pump belongs to the PV7 Adjustable Vane Pumps series and is produced by Bosch Rexroth for hydraulic automation where accurate flow control is required. A displacement of 30 cm³ moves a defined volume each shaft rotation, supporting mid-range circuit demands. The unit withstands a maximum operating pressure of 80 bar so actuators can be driven at stable working limits. A minimum output pressure of 20 bar keeps pilot lines pressurized when system load is low. The inlet side tolerates up to 2.5 bar absolute, protecting the seals against excessive suction stress, while a minimum inlet pressure of 0.8 bar prevents cavitation. When driven at 1450 rpm and 10 bar with 41 mm²/s oil, the pump delivers 43.5 l/min, providing adequate flow for compact machinery. Drive power reaches 6.8 kW at maximum pressure under the same speed and viscosity, which defines the motor rating needed for continuous duty.
A peak torque of 140 Nm is transmitted through the shaft, guiding coupling selection for the prime mover. The pump operates with oils between 16 mm²/s and 160 mm²/s, a viscosity span that maintains hydrodynamic lubrication across temperature shifts. Fluid temperature is allowed from –10 °C to +70 °C so the unit can serve in cold starts and moderately warm reservoirs. Filtration must keep cleanliness at ISO 4406 20/18/15 to avoid accelerated vane wear. Internal leakage at zero stroke is 2.5 l/min, which represents a small cooling flow that must be routed back to tank. Return-line restriction is limited to 2 bar to ensure this leakage exits freely and does not raise case pressure. Together these parameters define installation, oil conditioning, and mechanical interfaces for reliable service in industrial hydraulic systems.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Displacement
30 cm3
Drive Power At Pmax (1450 Rpm, 41 Mm2/s)
6.8 kW
Fluid Temperature Max
+70 °C
Fluid Temperature Min
-10 °C
Leakage Flow At Zero Stroke (pmax)
2.5 l/min
Leakage Oil Pressure Max
2 bar
Maximum Flow (1450 Rpm, 10 Bar, 41 Mm2/s)
43.5 l/min
Maximum Inlet Pressure (abs)
2.5 bar
Maximum Operating Pressure
80 bar
Maximum Torque
140 Nm
Minimum Inlet Pressure (abs)
0.8 bar
Operating Viscosity Max
160 mm2/s
Operating Viscosity Min
16 mm2/s
Output Pressure Minimum
20 bar
1620 Old Apex Road
Shipping & Payment Options
