Bosch Rexroth | PV7-1X100-150RE07MCO-08
PV7-1X/100-150RE07MCO-08
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PV7-1X/100-150RE07MCO-08 vane pump is manufactured by Bosch Rexroth for the PV7 Adjustable Vane Pumps series and supplies variable hydraulic flow in automated machinery. It displaces 150 cm³ per revolution, delivering up to 218 l/min at 1450 rpm and 10 bar for mid-range circuit demands. The shaft rotates clockwise, so motor coupling must observe the same direction. A SAE flange conforming to ISO 6162-1 provides the pressure outlet for straightforward manifold mounting. Leakage flow at zero stroke is 7.3 l/min, information used when sizing the tank return path. Continuous service is supported at 80 bar, while the factory zero-stroke setting establishes 30 bar to speed initial commissioning. The pump weighs 56 kg, which affects bracket design and lifting gear selection.
The hydraulic supply should remain between 0.8 and 2.5 bar absolute to prevent cavitation and maintain vane stability. Drive selection must account for a maximum torque load of 680 Nm during start-up and pressure peaks. Case drain routing can tolerate 2 bar, limiting backpressure on internal seals. NBR sealing elements are installed to suit common mineral oils found in industrial power units. Fluid cleanliness must be kept at ISO 4406 class 20/18/15 or better to protect bearing surfaces and extend overhaul intervals.
Technical Specifications
Cleanliness Class (iso 4406)
20/18/15
Direction Of Rotation
Clockwise
Displacement
150 cm³
Leakage Flow At Zero Stroke (pmax)
7.3 l/min
Line Connection
SAE Flange (ISO 6162-1)
Maximum Flow (1450 Rpm, 10 Bar)
218 l/min
Maximum Inlet Pressure (abs)
2.5 bar
Maximum Leakage Line Pressure
2 bar
Maximum Operating Pressure
80 bar
Maximum Torque
680 Nm
Minimum Inlet Pressure (abs)
0.8 bar
Seal Material
NBR
Weight
56 kg
Zero Stroke Pressure (as Delivered)
30 bar
1620 Old Apex Road
Shipping & Payment Options
