Bosch Rexroth | PVV52-1X162-068RA15DDMC
PVV52-1X/162-068RA15DDMC
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV52-1X/162-068RA15DDMC pump is built by Bosch Rexroth as part of the PV Fixed Displacement Pumps series for hydraulic automation systems requiring consistent flow delivery. It operates with clockwise shaft rotation to match standard right-hand drive arrangements. Stage 1 displacement is 162.2 cm³ per revolution, while stage 2 displacement is 67.5 cm³ per revolution, so two fixed delivery rates are available from a single housing. Under continuous duty, each stage tolerates 175 bar system pressure, letting the unit run in medium-pressure circuits without derating. At 1500 rpm, stage 1 provides up to 234 l/min and stage 2 reaches 100 l/min, establishing the nominal flow output for typical industrial motor speeds. The pump can accelerate to 1800 rpm with a 1 bar inlet and must not drop below 600 rpm to maintain internal lubrication.
Installation uses an SAE J744 flange so the pump mates directly with common hydraulic motors or gearboxes. Pressure fluid exits through a 1 inch SAE port on the cover and a 1 1⁄2 inch SAE port on the flange, both located on the top at 0 degrees to simplify manifold routing. Oil enters through a 3 1⁄2 inch SAE suction port that supports low inlet velocities and reduces cavitation risk. The arrangement of top-mounted pressure outlets streamlines pipe runs in horizontal power packs by keeping high-pressure lines on a single plane. In service, the complete assembly weighs 46 kg, which must be considered when selecting mounting hardware and support brackets.
Technical Specifications
Direction Of Rotation
Clockwise
Displacement Stage 1
162.2 cm³/rev
Displacement Stage 2
67.5 cm³/rev
Max Continuous Pressure Stage 1
175 bar
Max Continuous Pressure Stage 2
175 bar
Max Flow Stage 1 (1500 Min⁻1)
234 l/min
Max Flow Stage 2 (1500 Min⁻1)
100 l/min
Max Speed (1 Bar Inlet)
1800 min⁻1
Minimum Speed
600 min⁻1
Mounting Style
SAE J744 Flange
Pressure Connection (cover)
SAE 1 in
Pressure Connection (flange)
SAE 1 1/2 in
Pressure Port Position (cover)
Top (0°)
Pressure Port Position (flange)
Top (0°)
Suction Connection
SAE 3 1/2 in
Weight
46 kg
1620 Old Apex Road
Shipping & Payment Options
