Bosch Rexroth | PVV52-1X154-060RA15DDMC
PVV52-1X/154-060RA15DDMC
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV52-1X/154-060RA15DDMC pump is produced by Bosch Rexroth for the PV Fixed Displacement Pumps series and supplies a constant flow of hydraulic fluid to automation circuits. Its clockwise direction of rotation aligns with standard right-hand drive trains to simplify mechanical integration. A displacement of 60.0 cm³ per revolution on the cover side delivers metered volume for auxiliary functions, while the flange side displacement of 153.5 cm³ per revolution serves the main circuit that demands higher flow. At a nominal 1500 rpm, these two stages provide 89 l/min and 223 l/min respectively, giving designers separate flow paths without extra pumps. The unit tolerates speeds up to 1800 rpm at a 1 bar inlet, permitting output increases when system demand peaks. A 31.75 mm drive-shaft diameter matches common couplings for direct motor mounting, and the SAE C mounting flange positions the housing against standardized power-takeoff faces.
The pump sustains 175 bar as its continuous pressure limit, making it suitable for medium-pressure industrial presses and molding machines. Acceptable fluid viscosity spans from 13 mm²/s to 860 mm²/s, allowing operation with thin oils during cold starts and with heavier grades in high-load duty cycles. Fluid temperature may range from −10 °C to +70 °C, so the unit can support outdoor equipment and warm factory lines alike without premature wear. A large SAE 3 1/2 in suction connection lowers inlet velocity to curb cavitation, while the flange side pressure outlet uses an SAE 1 1/2 in port that mates with typical high-pressure hoses. Cleanliness must meet ISO 4406 20/18/15 to keep the internal gear set free of abrasive particles and maintain volumetric efficiency over long service intervals.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Direction Of Rotation
Clockwise
Displacement (cover Side)
60.0 cm³/rev
Displacement (flange Side)
153.5 cm³/rev
Drive Shaft Diameter
31.75 mm
Flow @1500 Rpm (cover Side)
89 l/min
Flow @1500 Rpm (flange Side)
223 l/min
Fluid Temperature Max
+70 °C
Fluid Temperature Min
−10 °C
Max Continuous Pressure
175 bar
Max Speed
1800 rpm (at 1 bar inlet)
Max Viscosity
860 mm²/s
Min Viscosity
13 mm²/s
Mounting Flange
SAE C
Pressure Connection (flange Side)
SAE 1 1/2 in
Suction Connection
SAE 3 1/2 in
1620 Old Apex Road
Shipping & Payment Options
