Bosch Rexroth | PVV52-1X139-045RJ15DDMC
PVV52-1X/139-045RJ15DDMC
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV52-1X/139-045RJ15DDMC pump belongs to the PV Fixed Displacement Pumps series and is built by Bosch Rexroth for hydraulic automation circuits that require a constant delivery of fluid. It turns clockwise, a configuration that determines the correct hose routing and motor orientation. The cover side delivers 45.4 cm³ per revolution, while the flange side provides 138.6 cm³ per revolution, so the dual-stage design can supply unequal flows from a single housing. When driven at 1500 rpm the cover side supplies up to 66 L/min, and the flange side reaches 203 L/min, supporting actuators with different volume demands. The pump tolerates speeds as low as 600 rpm for slow-moving machines and peaks at 1800 rpm at 1 bar inlet pressure without cavitation risk. Power is transmitted through a splined drive shaft that locks the rotor to standard hydraulic motors without key stress.
For continuous duty the pump withstands 175 bar on both the cover and flange outlets, allowing stable pressure in closed-loop or open-center systems. The pressure ports on both stages are located at the top of the casting at 0°, which simplifies pipework in horizontal installations. The cover side uses an SAE 1-inch pressure connection, whereas the flange side is equipped with an SAE 1-1/2-inch port to match its higher flow capacity. A dedicated SAE 1-1/2-inch suction port supplies the inlet passage so velocity losses remain low. Internal sealing components are produced from NBR, providing compatibility with standard mineral oils and many synthetic blends. These interface and material features support dependable field installation alongside the flow and speed ratings detailed earlier.
Technical Specifications
Continuous Pressure (cover Side)
175 bar
Continuous Pressure (flange Side)
175 bar
Cover-side Pressure Port Position
Top (0°)
Direction Of Rotation
Clockwise
Displacement (cover Side)
45.4 cm3/rev
Displacement (flange Side)
138.6 cm3/rev
Drive Shaft Type
Splined
Flange-side Pressure Port Position
Top (0°)
Max Flow At 1500 Rpm (cover Side)
66 l/min
Max Flow At 1500 Rpm (flange Side)
203 l/min
Maximum Speed (at 1 Bar)
1800 rpm
Minimum Speed
600 rpm
Pressure Connection (cover Side)
SAE 1 in
Pressure Connection (flange Side)
SAE 1 1/2 in
Seal Material
NBR
Suction Connection Size
SAE 1 1/2 in
1620 Old Apex Road
Shipping & Payment Options
