Bosch Rexroth | PVV5-1X193RA15UVC
PVV5-1X/193RA15UVC
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV5-1X/193RA15UVC fixed displacement pump is part of the PV Fixed Displacement Pumps series manufactured by Bosch Rexroth. The unit supplies constant flow in hydraulic automation circuits that need stable volume delivery per revolution. It displaces 193.4 cm³ for every shaft rotation, enabling high output with steady efficiency. Clockwise rotation is specified, and the shaft must run at a minimum speed of 600 rpm to maintain lubrication. Continuous operating pressure can be held up to 175 bar, while the drive train can apply as much as 610 Nm of torque to the cylindrical-A shaft end without exceeding limits. The pump mounts on a flange conforming to SAE J744, and the housing matches the 127-2 SAE-C flange version for compatibility with common power-take-off pads.
At the inlet, absolute pressure must stay between 0.83 bar and 2.4 bar to prevent cavitation and seal damage. Hydraulic connections are SAE ports secured with fifteen UNC screws, with the suction side supplied through a SAE 3-inch port and discharge routed through a SAE 1 1/2-inch pressure port located on the bottom surface, 180° from the inlet. System cleanliness must reach ISO 4406 code 20/18/15 to protect internal gears and bearings. Installed mass is 34 kg, so lifting points or mechanical assistance are advised during assembly.
Technical Specifications
Cleanliness Class
20/18/15 (ISO 4406)
Connection Type
SAE Ports, UNC Screws (15)
Displacement Volume
193.4 cm3/rev
Flange Version
127-2 (SAE-C)
Inlet Absolute Pressure Max
2.4 bar
Inlet Absolute Pressure Min
0.83 bar
Max Continuous Pressure
175 bar
Max Shaft Torque
610 Nm
Min Speed
600 min−1
Mounting Style
Flange (SAE J744)
Pressure Port Position
Bottom (180° from inlet)
Pressure Port Size
SAE 1 1/2 in
Rotation Direction
Clockwise
Shaft End Type
Cylindrical (A)
Suction Port Size
SAE 3 in
Weight
34 kg
1620 Old Apex Road
Shipping & Payment Options
