Bosch Rexroth | PVV5-1X183RA15DMC
PVV5-1X/183RA15DMC
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV5-1X/183RA15DMC is manufactured by Bosch Rexroth and belongs to the PV Fixed Displacement Pumps series. It supplies constant hydraulic flow in automation circuits where fixed displacement operation is required. The displacement is 183.4 cm³ per revolution, enabling a flow of 267 l/min when driven at 1500 rpm. Usable speed spans from 600 to 1800 min⁻¹, so integrators can match prime movers without overspeeding the unit. Rotation is clockwise, and the mounting flange follows the SAE-C 127-2 pattern for direct coupling to standard housings. Pressure is delivered through an SAE 1 1/2-inch port, and the SAE 3-inch suction port draws fluid from the reservoir.
The pump tolerates continuous system pressures up to 175 bar, permitting direct service in medium-duty hydraulic power units. HLP mineral oil specified by DIN 51524-2 is the recommended pressure fluid, providing the viscosity profile required for the internal gear set. NBR sealing elements contain the fluid and resist swelling over the stated chemical range. Oil temperature must stay between –10 °C and +70 °C so thermal expansion and film strength remain within design limits. Acceptable kinematic viscosity ranges from 13 to 860 mm²/s, ensuring reliable lubrication during cold start and full-load operation. These parameters make the unit suitable for automated presses, molding machines, and other installations that run on fixed output circuits.
Technical Specifications
Direction Of Rotation
Clockwise
Displacement
183.4 cm3/rev
Fluid Temperature Max
+70 °C
Fluid Temperature Min
-10 °C
Max Continuous Pressure
175 bar
Max Flow (1500 Min–1)
267 l/min
Max Speed (1 Bar Abs)
1800 min–1
Min Speed
600 min–1
Mounting Flange
SAE-C (127-2)
Pressure Fluid
HLP Mineral Oil (DIN 51524-2)
Pressure Port
SAE 1 1/2"
Seal Material
NBR
Suction Port
SAE 3"
Viscosity Max
860 mm2/s
Viscosity Min
13 mm2/s
1620 Old Apex Road
Shipping & Payment Options
