Bosch Rexroth | PVV5-1X162RA15DMC
PVV5-1X/162RA15DMC
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV5-1X/162RA15DMC is a fixed displacement pump in the PV Fixed Displacement Pumps series produced by Bosch Rexroth for hydraulic automation circuits. It moves 162.2 cm³ of fluid per revolution, supplying a predictable volume whenever the drive turns. Continuous duty is supported up to 175 bar so the unit can run in medium-pressure systems without derating. When driven at 1500 rpm the pump outputs 234 l/min, matching the flow demands of large cylinders and motors. Acceptable drive speeds range from 600 to 1800 min⁻¹ with a 1 bar inlet, giving designers latitude to select electric or diesel prime movers. The shaft turns clockwise, aligning with standard engine rotation, and the fluid must meet ISO 4406 20/18/15 cleanliness to minimize wear on the internal gear set.
The pump attaches directly to power units through an SAE J744 flange that follows the SAE-C 127-2 bolt pattern, ensuring consistent face alignment. Pressure fluid leaves by an SAE 1-1/2 inch port positioned on the top at 0° to the inlet, which streamlines pipe runs in crowded manifolds. Suction flow enters through an SAE 3 inch opening, and both ports use SAE flanges with UNC threads for secure, leak-free connections. An NBR seal package contains the hydraulic oil and withstands common mineral-based fluids. The assembly weighs 34 kg, so appropriate lifting hardware is recommended when mounting the unit to a reservoir or engine bell housing.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Displacement
162.2 cm3/rev
Max Continuous Pressure
175 bar
Max Flow At 1500 Rpm
234 l/min
Max Speed (1 Bar Inlet)
1800 min-1
Min Speed
600 min-1
Mounting Flange
SAE-C (127-2)
Mounting Style
SAE J744 Flange
Pipe Connections
SAE Flange, UNC Threads
Pressure Connection
SAE 1-1/2 in
Pressure Port Orientation
Top (0° From Inlet)
Rotation Direction
Clockwise
Seal Material
NBR
Suction Connection
SAE 3 in
Weight
34 kg
1620 Old Apex Road
Shipping & Payment Options
