Bosch Rexroth | PVV5-1X154RA15DMC
PVV5-1X/154RA15DMC
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV5-1X/154RA15DMC belongs to the PV Fixed Displacement Pumps series manufactured by Bosch Rexroth and serves as a constant-flow source for hydraulic automation. Its displacement of 153.5 cm³ per revolution sets the volumetric output delivered on every shaft turn. When driven at 1500 rpm, the pump moves 223 l/min, supplying fluid to medium-capacity circuits without flow regulators. A continuous outlet pressure rating of 175 bar keeps actuators supplied with stable force during sustained duty. Clockwise rotation is required so drive packages must match that direction. The cylindrical drive shaft allows straightforward coupling to common hubs and can transmit up to 610 Nm of torque, preventing stall during high load starts. An upper speed limit of 1800 min⁻¹ at 1 bar inlet defines the safe range before cavitation, while a minimum speed of 600 min⁻¹ maintains internal lubrication during slow cycles.
The pump must operate with fluid cleanliness no worse than ISO 4406 class 20/18/15 to protect close-fit parts from abrasive wear. SAE suction and pressure ports secured with UNC screws simplify integration into North American power units. A minimum absolute inlet pressure of 0.83 bar prevents vapor formation at the suction side. The SAE-C mounting flange aligns the housing with standard engine bell housings for secure support. A pressure connection sized at SAE 1 1/2 in carries discharge flow without excessive velocity, and this port sits on the top at 0° from the inlet to shorten external plumbing. The suction side uses a larger SAE 3 in connection to keep inlet velocity low and reduce noise. Overall weight is 34 kg, which dictates lifting and support requirements during installation or service.
Technical Specifications
Cleanliness Class (iso 4406)
20/18/15
Connections
SAE suction and pressure; UNC screws
Continuous Outlet Pressure
175 bar
Direction Of Rotation
Clockwise
Displacement
153.5 cm3/rev
Drive Shaft Max Torque
610 Nm
Drive Shaft Type
Cylindrical
Flow At 1500 Rpm
223 l/min
Maximum Speed (1 Bar Inlet)
1800 min-1
Minimum Inlet Pressure (abs)
0.83 bar
Minimum Speed
600 min-1
Mounting Flange
SAE-C
Pressure Connection
SAE 1 1/2 in
Pressure Port Position
Top (0° From Inlet)
Suction Connection
SAE 3 in
Weight
34 kg
1620 Old Apex Road
Shipping & Payment Options
