Bosch Rexroth | PVV42-1X069-045RJ15URMC
PVV42-1X/069-045RJ15URMC
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV42-1X/069-045RJ15URMC fixed displacement pump belongs to the PV Fixed Displacement Pumps series from Bosch Rexroth and supports hydraulic automation by delivering predictable flow in multi-circuit machines. The flange side displacement is 69.0 cm³ per revolution, while the cover side displacement is 45.4 cm³ per revolution, so each stage supplies a distinct volume for separate hydraulic lines. At 1,500 rpm the flange stage can provide up to 101 L/min and the cover stage reaches 66 L/min, enabling balanced actuation of parallel functions. The unit accepts a maximum speed of 1,800 rpm with a 1 bar inlet, giving designers latitude for higher output when required. Clockwise rotation is specified to match common prime movers. A SAE 1 1/4 in pressure connection on the flange side simplifies pipework with readily available fittings, and a SAE 3 in suction port supports low restriction fluid entry for cavitation control.
For continuous duty each stage is rated at 175 bar, allowing the pump to sustain high system pressure without derating. The spline shaft follows the SAE-C 1 1/4 in, 14-tooth, 12/24 DP profile and can transmit up to 580 Nm, so coupling remains secure even during start-up load peaks. NBR sealing elements accommodate mineral oils and moderate temperatures, limiting leakage over long service periods. Line routing is aided by the cover stage pressure port situated on the right and the flange stage port placed on the bottom, letting designers fit the pump into tight power packs without extra elbow fittings. A weight of 34.5 kg influences hoisting choice and baseplate stiffness during installation.
Technical Specifications
Continuous Pressure (each Stage)
175 bar
Displacement (cover Side)
45.4 cm3/rev
Displacement (flange Side)
69.0 cm3/rev
Max Flow Cover (1500 Rpm)
66 l/min
Max Flow Flange (1500 Rpm)
101 l/min
Max Shaft Torque (spline J)
580 Nm
Max Speed (1 Bar Inlet)
1800 rpm
Pressure Connection Flange
SAE 1 1/4 in
Pressure Port Position (cover)
Right
Pressure Port Position (flange)
Bottom
Rotation Direction
Clockwise
Seal Material
NBR
Shaft Spline
SAE-C 1 1/4 in, 14T, 12/24 DP
Suction Connection
SAE 3 in
Weight
34.5 kg
1620 Old Apex Road
Shipping & Payment Options
