Bosch Rexroth | PVV42-1X069-045RA15DDMC
PVV42-1X/069-045RA15DDMC
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV42-1X/069-045RA15DDMC pump belongs to the PV Fixed Displacement Pumps series from Bosch Rexroth and supplies hydraulic automation with a steady flow of oil. On the cover side it displaces 45.4 cm³ per revolution, which results in 66 l/min at 1500 rpm, while the flange side delivers 69.0 cm³ per revolution and 101 l/min at the same speed. The design supports continuous operation at 175 bar and can run safely up to 1800 rpm when the inlet is held at 1 bar. To prevent cavitation the inlet pressure must stay above 0.83 bar, and the pump can slow to 600 rpm when lower flow is required.
An SAE C (127-2) mounting flange positions the housing on power units, and the drive line can transmit 407 Nm through a 31.75 mm shaft that uses a 7.9 × 38.1 mm key. Pressure fluid exits on the cover side via an SAE 1 port and on the flange side via an SAE 1 1/4 port, while an SAE 3 suction port feeds the inlet. These port sizes simplify hose selection during installation. The pump weighs 34.5 kg, so handling equipment is advised when fitting it into a system.
Technical Specifications
Cover-side Displacement
45.4 cm³/rev
Cover-side Flow @1500 Rpm
66 l/min
Flange-side Displacement
69.0 cm³/rev
Flange-side Flow @1500 Rpm
101 l/min
Max Continuous Pressure
175 bar
Max Speed (1 Bar Inlet)
1800 rpm
Min Inlet Pressure (abs)
0.83 bar
Min Speed
600 rpm
Mounting Flange
SAE C (127-2)
Permissible Shaft Torque
407 Nm
Pressure Port (cover Side)
SAE 1
Pressure Port (flange Side)
SAE 1 1/4
Shaft Diameter
31.75 mm
Shaft Key Size
7.9 x 38.1 mm
Suction Port Size
SAE 3
Weight
34.5 kg
1620 Old Apex Road
Shipping & Payment Options
