Bosch Rexroth | PVV41-1X069-036RA15DDMC
PVV41-1X/069-036RA15DDMC
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVV41-1X/069-036RA15DDMC is a fixed-displacement pump in the PV Fixed Displacement Pumps series manufactured by Bosch Rexroth for hydraulic automation circuits that require a constant flow source. It turns in a clockwise direction, matching power take-off shafts that are set up for right-hand rotation. A front displacement of 69.0 cm³ per revolution defines the primary volume delivered to the main circuit, while a rear displacement of 36.4 cm³ per revolution supplies an auxiliary branch. The SAE C (127-2) mounting flange aligns with common industrial motor adapters for straightforward installation. Operating speeds can be set anywhere between 600 and 1800 min⁻¹, so the unit pairs with slow- or medium-speed prime movers. A minimum oil viscosity of 13 mm²/s is required to maintain film strength at operating temperature, and a maximum viscosity of 860 mm²/s limits cold-start thickness to prevent cavitation.
The pump sustains continuous pressures of 175 bar on the front stage and 210 bar on the rear stage, allowing the two sections to serve circuits with different load demands. It is designed for HLP mineral oil according to DIN 51524-2, ensuring stable lubrication and seal compatibility. The fluid may be cooled down to −10 °C without affecting operation, while heating is limited to +70 °C to protect elastomers. The cover-side pressure port accepts an SAE 3/4 fitting, and the flange-side pressure port is sized for an SAE 1 1/4 connection to handle the larger flow from the main section. An SAE 3 suction port presents a low-restriction inlet path to minimize pressure drop at high flow. These standardized interface dimensions simplify piping layout when the pump shares a manifold with other SAE-rated components.
Technical Specifications
Direction Of Rotation
Clockwise
Fluid Temperature Maximum
+70 °C
Fluid Temperature Minimum
−10 °C
Front Displacement
69.0 cm³/rev
Max Continuous Pressure (front)
175 bar
Max Continuous Pressure (rear)
210 bar
Max Speed
1800 min⁻1
Min Speed
600 min⁻1
Mounting Flange
SAE C (127-2)
Pressure Fluid
HLP Mineral Oil (DIN 51524-2)
Pressure Port Size (cover Side)
SAE 3/4
Pressure Port Size (flange Side)
SAE 1 1/4
Rear Displacement
36.4 cm³/rev
Suction Port Size
SAE 3
Viscosity Maximum
860 mm²/s
Viscosity Minimum
13 mm²/s
1620 Old Apex Road
Shipping & Payment Options
